1|Page
ACI AGGREGATE TESTING TECHNICIAN EXAM
(FULL TEST) || 2025 ACTUAL EXAM ALL
QUESTIONS AND 100% CORRECT ANSWERS
GRADE A+|| LATEST AND COMPLETE UPDATED
VERSION 2025|| GUARANTEED PASS!!!
Performance Checklist:
Sampling of Aggregates:
Flowing Aggregate Stream (Bins or Belt Discharge)
5 steps ANSWER- 1. Use a device that will hold the required amount of material
without overflowing.
2. Take each increment from the entire cross section of the material discharge
stream
3. Obtain a minimum of three approximately equal increments.
4. Combine the increments to form a field sample.
,2|Page
5. Ensure that the size of the field sample equals or exceeds the approximate
minimum mass needed or stated in Table 1.
Performance Checklist:
Sampling of Aggregates:
Conveyor Belt
7 Steps ANSWER- 1. Stop the conveyor belt and insert two templates conforming
to the shape of the belt into the aggregate steam.
2. Space the templates so the material between will yield an increment of the
required mass.
3. Carefully scoop the material between the templates into a suitable container.
4. Collect the fines with a brush and dust pan and add to the container.
,3|Page
5. Obtain a minimum of three approximately equal increments.
6. Combine the increments to form a field sample.
7. Ensure that the size of the field sample equals or exceeds the approximate
minimum mass needed or stated in Table 1.
Performance Checklist:
Sampling of Aggregates:
Stockpiles (Manual Sampling)
7 Steps ANSWER- Course Aggregate
1. Shove a board vertically into the pile just above the sampling point.
, 4|Page
2. Take increments from the top third, mid-point, and bottom third of the
volume of the pile.
Fine Aggregate
3. Remove the outer layer and sample from the material beneath.
4. Insert the appropriate sampling tube randomly to extract the increments.
5. Obtain a minimum of five increments.
Coarse and Fine Aggregate
6. Combine the increments to form a field sample.
7. Ensure that the size of the field sample equals or exceeds the approximate
minimum mass needed or stated in Table 1.
Performance Checklist:
Sampling of Aggregates:
ACI AGGREGATE TESTING TECHNICIAN EXAM
(FULL TEST) || 2025 ACTUAL EXAM ALL
QUESTIONS AND 100% CORRECT ANSWERS
GRADE A+|| LATEST AND COMPLETE UPDATED
VERSION 2025|| GUARANTEED PASS!!!
Performance Checklist:
Sampling of Aggregates:
Flowing Aggregate Stream (Bins or Belt Discharge)
5 steps ANSWER- 1. Use a device that will hold the required amount of material
without overflowing.
2. Take each increment from the entire cross section of the material discharge
stream
3. Obtain a minimum of three approximately equal increments.
4. Combine the increments to form a field sample.
,2|Page
5. Ensure that the size of the field sample equals or exceeds the approximate
minimum mass needed or stated in Table 1.
Performance Checklist:
Sampling of Aggregates:
Conveyor Belt
7 Steps ANSWER- 1. Stop the conveyor belt and insert two templates conforming
to the shape of the belt into the aggregate steam.
2. Space the templates so the material between will yield an increment of the
required mass.
3. Carefully scoop the material between the templates into a suitable container.
4. Collect the fines with a brush and dust pan and add to the container.
,3|Page
5. Obtain a minimum of three approximately equal increments.
6. Combine the increments to form a field sample.
7. Ensure that the size of the field sample equals or exceeds the approximate
minimum mass needed or stated in Table 1.
Performance Checklist:
Sampling of Aggregates:
Stockpiles (Manual Sampling)
7 Steps ANSWER- Course Aggregate
1. Shove a board vertically into the pile just above the sampling point.
, 4|Page
2. Take increments from the top third, mid-point, and bottom third of the
volume of the pile.
Fine Aggregate
3. Remove the outer layer and sample from the material beneath.
4. Insert the appropriate sampling tube randomly to extract the increments.
5. Obtain a minimum of five increments.
Coarse and Fine Aggregate
6. Combine the increments to form a field sample.
7. Ensure that the size of the field sample equals or exceeds the approximate
minimum mass needed or stated in Table 1.
Performance Checklist:
Sampling of Aggregates:
