100% de satisfacción garantizada Inmediatamente disponible después del pago Tanto en línea como en PDF No estas atado a nada 4,6 TrustPilot
logo-home
Examen

Chapter 1: Principles of Transmission Exam 2025 Questions and Answers 100% Pass

Puntuación
-
Vendido
-
Páginas
21
Grado
A+
Subido en
25-04-2025
Escrito en
2024/2025

Chapter 1: Principles of Transmission Exam 2025 Questions and Answers 100% Pass 100 Gb/s - Multimode optical fiber is best suited for premises applications where links are less than ≈100m (328ft) for data rates of _____ or less. - 155 mb/s - 1 gb/s - 10 gb/s - 100 gb/s Return Loss - For balanced twisted-pair cabling, _______ is the ratio between the transmitted power and the reflected power expressed in dBs. Solid - When comparing stranded conductors to solid conductors, and advantage of _____ conductors is less resistance. True - (ToF) Digital data can be transmitted noise free over essentially unlimited distances if the digital data received and regenerated at intervals before it is degraded by added noise. True - (ToF) Free space loss is the signal attenuation that would result if all reflection, refraction, scattering, diffraction, and absorption influences were removed. 2COPYRIGHT © 2025 BY EMILLY CHARLOTTE, ALL RIGHTS RESERVED 400 Gb/s - GigE is being deployed on many optical fiber networks. Typical IEEE recognized GigE network speeds in the MAN and WAN environment can be as high as: True - (ToF) Increasing the length of an optical fiber link can result in an increase in total signal attenuation. 780 nm - The center wavelength of short wavelength lasers is: False - (ToF) Stranded conductors have better transmission performance at high frequencies than solid conductors. At least twice - Analog signals can be converted into a digital signal by a multi- step process. The Sampling rate used must be ______ the highest frequency component of the analog signal. DS2 - Which of the following North American multiplexing levels has a data rate of 6.312 Mb/s? 1.0 dB/km - The maximum cable attenuation coefficient for single mode inside plant optical fiber cable at a wavelength of 1383 nm is: SDH (Synchronous Digital Hierarchy) - Standards have been established for optical fiber carrier transmission. The international standard is: Short wavelength laser - Which of the following multimode optical fiber transmitters has a spectral width of 4 nm? Increasing - The transmission characteristics of conductors pairs vary with frequency. ______ the frequency increases the speed of transmission through cable pairs. Carrier - Which one of the following is not a

Mostrar más Leer menos
Institución
RCDD
Grado
RCDD










Ups! No podemos cargar tu documento ahora. Inténtalo de nuevo o contacta con soporte.

Escuela, estudio y materia

Institución
RCDD
Grado
RCDD

Información del documento

Subido en
25 de abril de 2025
Número de páginas
21
Escrito en
2024/2025
Tipo
Examen
Contiene
Preguntas y respuestas

Temas

Vista previa del contenido

Chapter 1: Principles of Transmission
Exam 2025 Questions and Answers
100% Pass


100 Gb/s - ✔✔Multimode optical fiber is best suited for premises applications
where links are less than ≈100m (328ft) for data rates of _____ or less.




- 155 mb/s

- 1 gb/s

- 10 gb/s

- 100 gb/s

Return Loss - ✔✔For balanced twisted-pair cabling, _______ is the ratio between the
transmitted power and the reflected power expressed in dBs.

Solid - ✔✔When comparing stranded conductors to solid conductors, and advantage
of _____ conductors is less resistance.

True - ✔✔(ToF) Digital data can be transmitted noise free over essentially unlimited
distances if the digital data received and regenerated at intervals before it is
degraded by added noise.

True - ✔✔(ToF) Free space loss is the signal attenuation that would result if all
reflection, refraction, scattering, diffraction, and absorption influences were
removed.



COPYRIGHT © 2025 BY EMILLY CHARLOTTE, ALL RIGHTS RESERVED 1

,400 Gb/s - ✔✔GigE is being deployed on many optical fiber networks. Typical IEEE
recognized GigE network speeds in the MAN and WAN environment can be as high
as:

True - ✔✔(ToF) Increasing the length of an optical fiber link can result in an increase
in total signal attenuation.

780 nm - ✔✔The center wavelength of short wavelength lasers is:

False - ✔✔(ToF) Stranded conductors have better transmission performance at high
frequencies than solid conductors.

At least twice - ✔✔Analog signals can be converted into a digital signal by a multi-
step process. The Sampling rate used must be ______ the highest frequency
component of the analog signal.

DS2 - ✔✔Which of the following North American multiplexing levels has a data rate
of 6.312 Mb/s?

1.0 dB/km - ✔✔The maximum cable attenuation coefficient for single mode inside
plant optical fiber cable at a wavelength of 1383 nm is:

SDH (Synchronous Digital Hierarchy) - ✔✔Standards have been established for
optical fiber carrier transmission. The international standard is:

Short wavelength laser - ✔✔Which of the following multimode optical fiber
transmitters has a spectral width of 4 nm?

Increasing - ✔✔The transmission characteristics of conductors pairs vary with
frequency. ______ the frequency increases the speed of transmission through cable
pairs.

Carrier - ✔✔Which one of the following is not a type of modulation used in wireless
transmission?

More - ✔✔Stranded conductor cable has _____ attenuation than solid conductor
cable.



COPYRIGHT © 2025 BY EMILLY CHARLOTTE, ALL RIGHTS RESERVED 2

, 780 nm - ✔✔Optical fiber transmitters emit light at or near one of four nominal
wavelengths. Which one of the following is not one of those nominal wavelengths?

Shorter - ✔✔Loading coils limit the frequency at which information can be
transmitted. The loading coil spacing determines the upper cutoff frequency. The
______ the spacing between loading points, the higher the cutoff frequency.

≈90m (295ft); including - ✔✔A balanced twisted-pair permanent link consists of up
to _____ of horizontal cabling, _______ a connector at each end.

Dimensions and separation of conductors - ✔✔Series inductance is related to the:




- Dimensions and separation of conductors

- Dielectric loss of the insulation and jacket materials

- Dimensions and separation of conductors and to the dielectric constant of the
insulation and jacket materials

0.75 - ✔✔The maximum recommended connection loss for optical fiber connectors is
______ dB.




- 0.05

- 0.10

- 0.30

- 0.75

Resistive - ✔✔The earlier function model of a transmission line was based on _____
loss.




- resistive




COPYRIGHT © 2025 BY EMILLY CHARLOTTE, ALL RIGHTS RESERVED 3
$12.99
Accede al documento completo:

100% de satisfacción garantizada
Inmediatamente disponible después del pago
Tanto en línea como en PDF
No estas atado a nada


Documento también disponible en un lote

Conoce al vendedor

Seller avatar
Los indicadores de reputación están sujetos a la cantidad de artículos vendidos por una tarifa y las reseñas que ha recibido por esos documentos. Hay tres niveles: Bronce, Plata y Oro. Cuanto mayor reputación, más podrás confiar en la calidad del trabajo del vendedor.
EmillyCharlotte Howard Community College
Seguir Necesitas iniciar sesión para seguir a otros usuarios o asignaturas
Vendido
98
Miembro desde
1 año
Número de seguidores
5
Documentos
11964
Última venta
2 semanas hace
ALL-MAJOR.

On this page, you find all documents, package deals, and flashcards offered by seller Emilly Charlotte.

3.5

21 reseñas

5
7
4
6
3
2
2
3
1
3

Por qué los estudiantes eligen Stuvia

Creado por compañeros estudiantes, verificado por reseñas

Calidad en la que puedes confiar: escrito por estudiantes que aprobaron y evaluado por otros que han usado estos resúmenes.

¿No estás satisfecho? Elige otro documento

¡No te preocupes! Puedes elegir directamente otro documento que se ajuste mejor a lo que buscas.

Paga como quieras, empieza a estudiar al instante

Sin suscripción, sin compromisos. Paga como estés acostumbrado con tarjeta de crédito y descarga tu documento PDF inmediatamente.

Student with book image

“Comprado, descargado y aprobado. Así de fácil puede ser.”

Alisha Student

Preguntas frecuentes