Moosa Yasir BMC192020926
Unit 1 Assignment 1 Task 1 (P1 and P3)
Use the following table to complete Task 1:
Enter the description of your first chosen job role and responsibilities related to mechanical engineering here:
The jobs that I chose is automotive engineering. An automotive engineer role is to research latest technologies used in the automobile sectors and
then design and modify the vehicles. Also, they will plan, calculate cost, draw, and design the specs of vehicles. Furthermore, they will create
blueprints and prototypes using CAD software. Finally, they will check the faults in the car.
Identify the 2 Health and safety Describe the first key feature Describe the second key Describe the third key feature of
regulations that apply to the of the chosen regulation here. feature of the chosen the chosen regulation here.
job identified above here. regulation here.
An examinator must alert the The person who is examining must An employer who is notified by the
employer, if he thinks the lifting make a report or record in writing. inspector must make sure that the
LOLER equipment can become a danger to The information in the report must equipment is not used.
the workers include the employer, the person
who gave the employer the
equipment and worker at risk of the
danger of equipment. However, he
can do this by a signature.
Employer should provide spray Employers should provide enclosed Employer should check for health
booth for paint spraying and space and air- line respiratory surveillance for asthma and skin
COSHH protective equipment. equipment when employees are checks of the employees before
spraying. spray painting.
Identify the 2 sets of Describe the first key feature Describe the second key Describe the third key feature of
environmental legislation that of the chosen legislation here. feature of the chosen the chosen legislation here.
apply to the job identified legislation here.
above here.
If the employer would like to move An application must be submitted When having a permit, you must
PCR the petrol outside the workplace, and must contain follow general principles which are:
he must obtain a certificate. name and address of the person, when taking out petrol you must do
the address where the petrol is everything to prevent pollution such
kept and drawing layout of the as placing the petrol in a large tank
premises, pipe work. to prevent in going into the ground
Water Act 1974 to prevent and This law gives rights to the board to This regulation states that you If trade effluent has been dumped
control water pollution inspect trade effluents of any should seek consent of state board, into a stream, knowingly causing
business and, able to analyse if you are setting up a process pollution will receive 6 to 12 months
, Moosa Yasir BMC192020926
samples of water from a nearby which leaks trade effluent into a in jail as well as fines.
stream stream.
Enter the description of your second chosen job role and responsibilities here:
Power engineering: The role of a power engineer is in charge of maintenance, repair and the operations of mechanical system which are found in building, power plants and
engine room. They will work with boilers, heating, automation, turbines and pumps, piping.
List the 2 Health and safety Describe the first key feature Describe the second key Describe the third key feature of
regulations that apply to the of the chosen regulation here. feature of the chosen the chosen regulation here.
job identified above here. regulation here.
Employer must make sure the Every employer must provide The employer must find out the risk
equipment that is provided must be suitable work equipment which of the working conditions of the
The Provision and Use of Work constructed well so it will meet the must only be used for operations. worker and therefore provide
Equipment Regulations 1998 purpose of why its required. suitable equipment, so the health
and safety risk are reduced
significantly.
DSEAR Employer must find out dangerous Employers must put in a control to Employers must identify where areas
gases found in the workspaces. reduce the risk of the dangerous of the workplace that can cause
substances. explosions and avoid ignition
sources in the area.
Identify the 2 sets of Describe the first key feature Describe the second key Describe the third key feature of
environmental legislation that of the chosen legislation here. feature of the chosen the chosen legislation here.
apply to the job identified legislation here.
above here.
The producer must keep record of For each category it must say how This record must be kept for at least
information on the amount of EEE many in tonnes is going to be used 4 years and then must be available
in tonnes which has been placed on by the business. when the authority asks for it.
WEEE Directive the market and must be placed in
categories.
if dark smoke is released from the A person who owns a furnace if guilty of an offence you must
Clean Air Act 1993 chimney of an industrial place the should not use it to burn 45.4 KG or prove that the gas emission was not
owner or employer will be guilty of more of solid materials an hour or intentional, and that the employer
an offence. 366.4 kilowatts or more of liquid or took all the steps to minimise these
gas matter. gases.
Unit 1 Assignment 1 Task 1 (P1 and P3)
Use the following table to complete Task 1:
Enter the description of your first chosen job role and responsibilities related to mechanical engineering here:
The jobs that I chose is automotive engineering. An automotive engineer role is to research latest technologies used in the automobile sectors and
then design and modify the vehicles. Also, they will plan, calculate cost, draw, and design the specs of vehicles. Furthermore, they will create
blueprints and prototypes using CAD software. Finally, they will check the faults in the car.
Identify the 2 Health and safety Describe the first key feature Describe the second key Describe the third key feature of
regulations that apply to the of the chosen regulation here. feature of the chosen the chosen regulation here.
job identified above here. regulation here.
An examinator must alert the The person who is examining must An employer who is notified by the
employer, if he thinks the lifting make a report or record in writing. inspector must make sure that the
LOLER equipment can become a danger to The information in the report must equipment is not used.
the workers include the employer, the person
who gave the employer the
equipment and worker at risk of the
danger of equipment. However, he
can do this by a signature.
Employer should provide spray Employers should provide enclosed Employer should check for health
booth for paint spraying and space and air- line respiratory surveillance for asthma and skin
COSHH protective equipment. equipment when employees are checks of the employees before
spraying. spray painting.
Identify the 2 sets of Describe the first key feature Describe the second key Describe the third key feature of
environmental legislation that of the chosen legislation here. feature of the chosen the chosen legislation here.
apply to the job identified legislation here.
above here.
If the employer would like to move An application must be submitted When having a permit, you must
PCR the petrol outside the workplace, and must contain follow general principles which are:
he must obtain a certificate. name and address of the person, when taking out petrol you must do
the address where the petrol is everything to prevent pollution such
kept and drawing layout of the as placing the petrol in a large tank
premises, pipe work. to prevent in going into the ground
Water Act 1974 to prevent and This law gives rights to the board to This regulation states that you If trade effluent has been dumped
control water pollution inspect trade effluents of any should seek consent of state board, into a stream, knowingly causing
business and, able to analyse if you are setting up a process pollution will receive 6 to 12 months
, Moosa Yasir BMC192020926
samples of water from a nearby which leaks trade effluent into a in jail as well as fines.
stream stream.
Enter the description of your second chosen job role and responsibilities here:
Power engineering: The role of a power engineer is in charge of maintenance, repair and the operations of mechanical system which are found in building, power plants and
engine room. They will work with boilers, heating, automation, turbines and pumps, piping.
List the 2 Health and safety Describe the first key feature Describe the second key Describe the third key feature of
regulations that apply to the of the chosen regulation here. feature of the chosen the chosen regulation here.
job identified above here. regulation here.
Employer must make sure the Every employer must provide The employer must find out the risk
equipment that is provided must be suitable work equipment which of the working conditions of the
The Provision and Use of Work constructed well so it will meet the must only be used for operations. worker and therefore provide
Equipment Regulations 1998 purpose of why its required. suitable equipment, so the health
and safety risk are reduced
significantly.
DSEAR Employer must find out dangerous Employers must put in a control to Employers must identify where areas
gases found in the workspaces. reduce the risk of the dangerous of the workplace that can cause
substances. explosions and avoid ignition
sources in the area.
Identify the 2 sets of Describe the first key feature Describe the second key Describe the third key feature of
environmental legislation that of the chosen legislation here. feature of the chosen the chosen legislation here.
apply to the job identified legislation here.
above here.
The producer must keep record of For each category it must say how This record must be kept for at least
information on the amount of EEE many in tonnes is going to be used 4 years and then must be available
in tonnes which has been placed on by the business. when the authority asks for it.
WEEE Directive the market and must be placed in
categories.
if dark smoke is released from the A person who owns a furnace if guilty of an offence you must
Clean Air Act 1993 chimney of an industrial place the should not use it to burn 45.4 KG or prove that the gas emission was not
owner or employer will be guilty of more of solid materials an hour or intentional, and that the employer
an offence. 366.4 kilowatts or more of liquid or took all the steps to minimise these
gas matter. gases.
