NCCER STUDY GUIDE 130
Questions with correct
answers
1. Which organization requires a person to be trained in order to operate personal lifting
||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| |||
equipment? - correct answer ✔OSHA ||| ||| ||| |||
1. Where would the usage of a RTJ Gasket be found? - correct answer ✔High Pressure
||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| |||
System
All of the following are examples of internal man way hardware except - correct answer
||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| |||
✔Slide Fastener |||
1. What type of wrench measures how much a fastener is being tightened? - correct answer
||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| |||
✔Torque
1. The fitting that makes it easy to disassemble threaded piping is - correct answer ✔Union
||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| |||
1. What is the purpose of a gasket? - correct answer ✔TO CREATE A SEAL BETWEEN 2
||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| |||
STATIONARY PARTS |||
1. When rigging a valve the sling should be placed around the - correct answer ✔Body
||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| |||
What is the minimum required oxygen and fuel gas storage separation when not in use and
||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| |||
stored in open area? - correct answer ✔20'
||| ||| ||| ||| ||| ||| |||
, When tightening up a man way on a tower that has ¼" x 8" stud bolts what size wrench
||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| |||
should you use? - correct answer ✔2" ||| ||| ||| ||| ||| |||
What should a worker do before removing the flange bolts on the exchanged channel head?
||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| |||
- correct answer ✔VERIFY BLINDS ARE IN A BLEEDERS ARE OPEN AND LOTO
||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| |||
In a piping threading machine equipped with NPT dies is designed to cut which type of
||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| |||
threads? - correct answer ✔NATIONAL PIPE THREADS ||| ||| ||| ||| ||| |||
Flange protectors should be removed from the valve when - correct answer ✔READY FOR
||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| |||
INSTALLATION
Which sling configuration has the greatest capacity? - correct answer ✔VERTICAL
||| ||| ||| ||| ||| ||| ||| ||| ||| |||
To pull a bundle from the shell the eyebolts should be installed on the - correct answer
||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| |||
✔TUBE STEEL |||
What is the standard pipe thread used in the USA? - correct answer ✔NPT
||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| |||
After getting a hot work permit, who must be present before starting the work? - correct
||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| |||
answer ✔FIRE WATCH ||| |||
What type of metal would an oxy fuel torch be used to cut? - correct answer ✔CARBON
||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| |||
STEEL
When doing a hydrostatic test, according to the code where should the gauge be installed on
||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| |||
the system? - correct answer ✔HIGHEST POINT
||| ||| ||| ||| ||| ||| |||
Questions with correct
answers
1. Which organization requires a person to be trained in order to operate personal lifting
||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| |||
equipment? - correct answer ✔OSHA ||| ||| ||| |||
1. Where would the usage of a RTJ Gasket be found? - correct answer ✔High Pressure
||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| |||
System
All of the following are examples of internal man way hardware except - correct answer
||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| |||
✔Slide Fastener |||
1. What type of wrench measures how much a fastener is being tightened? - correct answer
||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| |||
✔Torque
1. The fitting that makes it easy to disassemble threaded piping is - correct answer ✔Union
||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| |||
1. What is the purpose of a gasket? - correct answer ✔TO CREATE A SEAL BETWEEN 2
||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| |||
STATIONARY PARTS |||
1. When rigging a valve the sling should be placed around the - correct answer ✔Body
||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| |||
What is the minimum required oxygen and fuel gas storage separation when not in use and
||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| |||
stored in open area? - correct answer ✔20'
||| ||| ||| ||| ||| ||| |||
, When tightening up a man way on a tower that has ¼" x 8" stud bolts what size wrench
||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| |||
should you use? - correct answer ✔2" ||| ||| ||| ||| ||| |||
What should a worker do before removing the flange bolts on the exchanged channel head?
||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| |||
- correct answer ✔VERIFY BLINDS ARE IN A BLEEDERS ARE OPEN AND LOTO
||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| |||
In a piping threading machine equipped with NPT dies is designed to cut which type of
||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| |||
threads? - correct answer ✔NATIONAL PIPE THREADS ||| ||| ||| ||| ||| |||
Flange protectors should be removed from the valve when - correct answer ✔READY FOR
||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| |||
INSTALLATION
Which sling configuration has the greatest capacity? - correct answer ✔VERTICAL
||| ||| ||| ||| ||| ||| ||| ||| ||| |||
To pull a bundle from the shell the eyebolts should be installed on the - correct answer
||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| |||
✔TUBE STEEL |||
What is the standard pipe thread used in the USA? - correct answer ✔NPT
||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| |||
After getting a hot work permit, who must be present before starting the work? - correct
||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| |||
answer ✔FIRE WATCH ||| |||
What type of metal would an oxy fuel torch be used to cut? - correct answer ✔CARBON
||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| |||
STEEL
When doing a hydrostatic test, according to the code where should the gauge be installed on
||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| ||| |||
the system? - correct answer ✔HIGHEST POINT
||| ||| ||| ||| ||| ||| |||
