1
Ag Mech Test Questions with Detailed Verified Answers
(100% Correct Answers) /Already Graded A+
Why is an isometric drawing used in construction plans?
Ans: Show structure as a whole
Mechanical drawings are used when:
Ans: A detailed description is needed
A sectional view is used in construction plans to show:
Ans: Vertical cross-section
A perspective drawing is used to show:
Ans: Three-dimensions
Why is a three-view drawing used?
Ans: Shows top, front, and end
A fastener that has a hex or square head and a shank threaded about 1" is a:
Ans: Machine bolt
A round or flat headed fastener that is threaded the entire length and has a
nut is a:
Ans: Stove bolt
Screw size is determined by the:
Ans: Length and gauge of the screw
What nails are used mainly on rough work such as framing, fencing, and form
building?
Ans: Common
Approved By:
vPretest - Stuvia US
, 2
What type bolt has threads similar to a wood screw?
Ans: Lag
What type nail has a flat head and diamond shaped points?
Ans: Common
What type nail is thin, short, and has small heads?
Ans: Brad
What type nails have small heads and are used for interior trim?
Ans: Finishing
What type of bolt has a square shank under a round oval head?
Ans: Carriage
What wood fastener has thread?
Ans: Flathead wood screw
What is the BEST fastener to use when equipment needs to be strong but at
the same time needs to be dismantled on a regular basis?
Ans: Machine bolt
What is the BEST tool to cut a "V" in wood so that the top of a flathead
screw will be flush with or just below the surgfaece of the wood?
Ans: Countersink
What nail is used for fastening tongue and groove and finish work?
Ans: Casing
What type of bolt should be used as fasteners for lightweight metal
structures?
Approved By:
vPretest - Stuvia US
Ag Mech Test Questions with Detailed Verified Answers
(100% Correct Answers) /Already Graded A+
Why is an isometric drawing used in construction plans?
Ans: Show structure as a whole
Mechanical drawings are used when:
Ans: A detailed description is needed
A sectional view is used in construction plans to show:
Ans: Vertical cross-section
A perspective drawing is used to show:
Ans: Three-dimensions
Why is a three-view drawing used?
Ans: Shows top, front, and end
A fastener that has a hex or square head and a shank threaded about 1" is a:
Ans: Machine bolt
A round or flat headed fastener that is threaded the entire length and has a
nut is a:
Ans: Stove bolt
Screw size is determined by the:
Ans: Length and gauge of the screw
What nails are used mainly on rough work such as framing, fencing, and form
building?
Ans: Common
Approved By:
vPretest - Stuvia US
, 2
What type bolt has threads similar to a wood screw?
Ans: Lag
What type nail has a flat head and diamond shaped points?
Ans: Common
What type nail is thin, short, and has small heads?
Ans: Brad
What type nails have small heads and are used for interior trim?
Ans: Finishing
What type of bolt has a square shank under a round oval head?
Ans: Carriage
What wood fastener has thread?
Ans: Flathead wood screw
What is the BEST fastener to use when equipment needs to be strong but at
the same time needs to be dismantled on a regular basis?
Ans: Machine bolt
What is the BEST tool to cut a "V" in wood so that the top of a flathead
screw will be flush with or just below the surgfaece of the wood?
Ans: Countersink
What nail is used for fastening tongue and groove and finish work?
Ans: Casing
What type of bolt should be used as fasteners for lightweight metal
structures?
Approved By:
vPretest - Stuvia US
