Basic Orientation Plus Study Guide
Questions and Complete Answers
Fall Protection - Answer: The most cited OSHA violation
Management Leadership, Hazard Prevention, Program Evaluation and Improvement, Worker
Participation, Multi employer Worksite, Education and Training, Hazard Identification and
Assessment - Answer: 7 Core elements that are essential to recognizing hazards and reducing or
even eliminating workplace hazards
Supervisor - Answer: Who should you go to in doubt about what task to do on a job
Process Safety Management (PSM) - Answer: addresses the requirements for preventing and
lessening the result of a catastrophic release of toxic, reactive, flammable, or highly hazardous
chemicals.
Identified, controlled, evaluated - Answer: Process Hazard Analysis( PHA) are used to identify and
evaluate major processes and ensure they are what?
Management of Change (MOC) - Answer: If you are replacing a price of equipment, the new one
should be the same one as the one being removed. If it's not, you should find out wether the change
was on purpose. This is called?
Safety - Answer: Your first concern when you first step on the plant work site?
qualified, authorized - Answer: In order To operate vehicles or mobile equipment while at the
facility you should be what?
Safety Work Permits, Line Entry or Line Breaking Permits, Confined Space Entry Permits, Lockout/
Tagout Permits, Hot Work Permits - Answer: What types of permits are most likely needed before
you start the job for the day?
Caution signs - Answer: Used to warn against potentiometer hazards or to caution against unsafe
practices
, Barriers - Answer: Physical devices that are designed to prevent entry into an area where hazards
are present
Warning signs - Answer: Used where immediate non life threatening hazards exist
Barricade - Answer: Obstacles that discourage the passage of persons or vehicles
Danger signs - Answer: Used only where an immediate life threatening hazard exist
Knees - Answer: What should be used when lifting or setting down a load?
Human Immunodeficiency virus(HIV), Hepatitis B virus(HBV), Hepatitis C virus(HCV) - Answer: The
most common viruses/diseases caused by blood borne pathogens ina workplace
Flammability - Answer: Hazard color Red means
Health - Answer: Hazard color blue means
Instability - Answer: Hazard color yellow means
Other Hazards and special precautions - Answer: Hazard color white means
Physical Hazard - Answer: Hazard color orange means
Physical Hazard - Answer: Hazards that cause injury or property damage
Health Hazard - Answer: Hazards that cause likeness or injury
Personal Protective Equipment(PPE) - Answer: What equipment is used to protect workers from
hazards?
Engineering controls - Answer: What changes the actual work environment?
Questions and Complete Answers
Fall Protection - Answer: The most cited OSHA violation
Management Leadership, Hazard Prevention, Program Evaluation and Improvement, Worker
Participation, Multi employer Worksite, Education and Training, Hazard Identification and
Assessment - Answer: 7 Core elements that are essential to recognizing hazards and reducing or
even eliminating workplace hazards
Supervisor - Answer: Who should you go to in doubt about what task to do on a job
Process Safety Management (PSM) - Answer: addresses the requirements for preventing and
lessening the result of a catastrophic release of toxic, reactive, flammable, or highly hazardous
chemicals.
Identified, controlled, evaluated - Answer: Process Hazard Analysis( PHA) are used to identify and
evaluate major processes and ensure they are what?
Management of Change (MOC) - Answer: If you are replacing a price of equipment, the new one
should be the same one as the one being removed. If it's not, you should find out wether the change
was on purpose. This is called?
Safety - Answer: Your first concern when you first step on the plant work site?
qualified, authorized - Answer: In order To operate vehicles or mobile equipment while at the
facility you should be what?
Safety Work Permits, Line Entry or Line Breaking Permits, Confined Space Entry Permits, Lockout/
Tagout Permits, Hot Work Permits - Answer: What types of permits are most likely needed before
you start the job for the day?
Caution signs - Answer: Used to warn against potentiometer hazards or to caution against unsafe
practices
, Barriers - Answer: Physical devices that are designed to prevent entry into an area where hazards
are present
Warning signs - Answer: Used where immediate non life threatening hazards exist
Barricade - Answer: Obstacles that discourage the passage of persons or vehicles
Danger signs - Answer: Used only where an immediate life threatening hazard exist
Knees - Answer: What should be used when lifting or setting down a load?
Human Immunodeficiency virus(HIV), Hepatitis B virus(HBV), Hepatitis C virus(HCV) - Answer: The
most common viruses/diseases caused by blood borne pathogens ina workplace
Flammability - Answer: Hazard color Red means
Health - Answer: Hazard color blue means
Instability - Answer: Hazard color yellow means
Other Hazards and special precautions - Answer: Hazard color white means
Physical Hazard - Answer: Hazard color orange means
Physical Hazard - Answer: Hazards that cause injury or property damage
Health Hazard - Answer: Hazards that cause likeness or injury
Personal Protective Equipment(PPE) - Answer: What equipment is used to protect workers from
hazards?
Engineering controls - Answer: What changes the actual work environment?
