VIVINT SHP PRACTICE WITH CORRECT
ACTUAL QUESTIONS AND CORRECTLY
WELL DEFINED ANSWERS LATEST 2025
ALREADY GRADED A+
Which step should you always take to ensure that the Z wave network is aligned
in the strongest manner - ANSWERS-Select rediscover network from the Z wave
toolbox
When powering up a deadbolt smart lock for the first time which of the
following things must you always do - ANSWERS-Initiates the lock handing
procedure
What is the input voltage range of the doorbell camera - ANSWERS-12-24 V
How many stages of heat does a conventional unit with a furnace have if it has
both a W and W2 wire - ANSWERS-Two stages
, Determine the HVAC set up based on the following wiring, C, B, W-2, Y, Rh, G -
ANSWERS-Heat pump, AC powered, one stage pump, 1 Aux heat
True or false when installing a SMKT3 you must use the included screws and
anchors - ANSWERS-True
True or false when installing the fire fighter it is required to test the customers
existing smoke detectors - ANSWERS-True
When installing a DW 21 where is the approved location for the sensor -
ANSWERS-Between 6 inches (15cm) and 2 inches (61cm) from the floor
When installing a DW11 on a vinyl or metal frame what should you primarily
use to mount the sensor - ANSWERS-Provided double-sided tape
Select all that apply which of the following materials can you use to group
multiple ground terminals in the takeover module - ANSWERS-B
connectors/beans and Wire caps
Which of the following sensors are not allowed to program using a translator -
ANSWERS-Smoke detector
True or false when installing the take 345 you must always test the new 12 V
battery before using it - ANSWERS-True
ACTUAL QUESTIONS AND CORRECTLY
WELL DEFINED ANSWERS LATEST 2025
ALREADY GRADED A+
Which step should you always take to ensure that the Z wave network is aligned
in the strongest manner - ANSWERS-Select rediscover network from the Z wave
toolbox
When powering up a deadbolt smart lock for the first time which of the
following things must you always do - ANSWERS-Initiates the lock handing
procedure
What is the input voltage range of the doorbell camera - ANSWERS-12-24 V
How many stages of heat does a conventional unit with a furnace have if it has
both a W and W2 wire - ANSWERS-Two stages
, Determine the HVAC set up based on the following wiring, C, B, W-2, Y, Rh, G -
ANSWERS-Heat pump, AC powered, one stage pump, 1 Aux heat
True or false when installing a SMKT3 you must use the included screws and
anchors - ANSWERS-True
True or false when installing the fire fighter it is required to test the customers
existing smoke detectors - ANSWERS-True
When installing a DW 21 where is the approved location for the sensor -
ANSWERS-Between 6 inches (15cm) and 2 inches (61cm) from the floor
When installing a DW11 on a vinyl or metal frame what should you primarily
use to mount the sensor - ANSWERS-Provided double-sided tape
Select all that apply which of the following materials can you use to group
multiple ground terminals in the takeover module - ANSWERS-B
connectors/beans and Wire caps
Which of the following sensors are not allowed to program using a translator -
ANSWERS-Smoke detector
True or false when installing the take 345 you must always test the new 12 V
battery before using it - ANSWERS-True
