NACE CIP Level 1 Sample Quizes
All corrosion of iron at normal ambient conditions is - Correct Answers -an
electrochemical process
The cathode of a corrosion cell - Correct Answers -has an opposite electrical polarity to
the anode
Based on the galvanic series presented in the NACE CIP Level 1 Manual, which three
can be used effectively as galvanic anodes for carbon steel? - Correct Answers -Zinc,
aluminum, magnesium
A corrosion inhibitor is a substance that, when added to an environment - Correct
Answers -decreases the rate of corrosion
A decrease in temperature will generally cause the corrosion rate to - Correct Answers -
decrease
The electrolyte is the solution that carries (conducts) - Correct Answers -the anion, and
the cations
While oxidation occurs at the anode, reduction occurs at the cathode - Correct Answers
-true
The four elements of a corrosion cell are anode, the cathode, the electrode, and the
metallic pathway - Correct Answers -False
The anode is the - Correct Answers -part of the metal that corrodes
General corrosion is described as - Correct Answers -uniform loss of thickness over the
exposed surface
In order to reach consensus and to resolve conflict on the job, the NACE Inspector's
preferred course of action is to - Correct Answers -actively listen and endeavor to
understand the postions of others.
A proper coating specification should contain information regarding - Correct Answers -
surface preparation standards, safety, locations to be coated
, According to the NACE attestation, it's OK to accept a gift from a contractor as long as
the gift is below the value identified in your company policy. - Correct Answers -false
If an inspector finds discrepancies between the specification and the coating
manufacturers technical data sheet, the preferred coarse of action is to - Correct
Answers -seek written clarification from the specifier
All of the following are generally included within inspection reports EXCEPT - Correct
Answers -cost information
Inspectors reports provide sufficient detail permitting the owner to evaluate - Correct
Answers -contractor's performance, inspector's performance, job progress, work
interruptions
When applying coatings, instruction regarding appropriate types of Personal Protection
Equipment (PPE) will always be found within the - Correct Answers -material safety
data sheet (MSDS) or safety data sheet (SDS)
Material inventory report should contain all of the following EXCEPT - Correct Answers -
overall cost of materials
Safety enforcement is one of the primary responsibilities of the coating inspector -
Correct Answers –false
NACE No.8/SSPC SP-14 is the joint standard for which of the following? - Correct
Answers -Joint standard for industrial blast cleaning
According to NACE No.4/SSPC SP-7, mill scale, rust, and paint are considered
adherent if they cannot be removed - Correct Answers -by lifting with a dull putty knife
ISO 8501 ST-3 is the standard for which of the following? - Correct Answers -Very
thorough hand and/or power tool cleaning
SSPC SP-15 is a standard for which of the following? - Correct Answers -Commercial
grade power tool cleaning
Grounding the pump and fluid hose used in airless spray - Correct Answers -reduces
viscosity.
If the relative humidity is too high, solvent entrapment within the coating film may occur.
- Correct Answers -true
The dew point is the - Correct Answers -temperature at which moisture condenses on a
surface.
All corrosion of iron at normal ambient conditions is - Correct Answers -an
electrochemical process
The cathode of a corrosion cell - Correct Answers -has an opposite electrical polarity to
the anode
Based on the galvanic series presented in the NACE CIP Level 1 Manual, which three
can be used effectively as galvanic anodes for carbon steel? - Correct Answers -Zinc,
aluminum, magnesium
A corrosion inhibitor is a substance that, when added to an environment - Correct
Answers -decreases the rate of corrosion
A decrease in temperature will generally cause the corrosion rate to - Correct Answers -
decrease
The electrolyte is the solution that carries (conducts) - Correct Answers -the anion, and
the cations
While oxidation occurs at the anode, reduction occurs at the cathode - Correct Answers
-true
The four elements of a corrosion cell are anode, the cathode, the electrode, and the
metallic pathway - Correct Answers -False
The anode is the - Correct Answers -part of the metal that corrodes
General corrosion is described as - Correct Answers -uniform loss of thickness over the
exposed surface
In order to reach consensus and to resolve conflict on the job, the NACE Inspector's
preferred course of action is to - Correct Answers -actively listen and endeavor to
understand the postions of others.
A proper coating specification should contain information regarding - Correct Answers -
surface preparation standards, safety, locations to be coated
, According to the NACE attestation, it's OK to accept a gift from a contractor as long as
the gift is below the value identified in your company policy. - Correct Answers -false
If an inspector finds discrepancies between the specification and the coating
manufacturers technical data sheet, the preferred coarse of action is to - Correct
Answers -seek written clarification from the specifier
All of the following are generally included within inspection reports EXCEPT - Correct
Answers -cost information
Inspectors reports provide sufficient detail permitting the owner to evaluate - Correct
Answers -contractor's performance, inspector's performance, job progress, work
interruptions
When applying coatings, instruction regarding appropriate types of Personal Protection
Equipment (PPE) will always be found within the - Correct Answers -material safety
data sheet (MSDS) or safety data sheet (SDS)
Material inventory report should contain all of the following EXCEPT - Correct Answers -
overall cost of materials
Safety enforcement is one of the primary responsibilities of the coating inspector -
Correct Answers –false
NACE No.8/SSPC SP-14 is the joint standard for which of the following? - Correct
Answers -Joint standard for industrial blast cleaning
According to NACE No.4/SSPC SP-7, mill scale, rust, and paint are considered
adherent if they cannot be removed - Correct Answers -by lifting with a dull putty knife
ISO 8501 ST-3 is the standard for which of the following? - Correct Answers -Very
thorough hand and/or power tool cleaning
SSPC SP-15 is a standard for which of the following? - Correct Answers -Commercial
grade power tool cleaning
Grounding the pump and fluid hose used in airless spray - Correct Answers -reduces
viscosity.
If the relative humidity is too high, solvent entrapment within the coating film may occur.
- Correct Answers -true
The dew point is the - Correct Answers -temperature at which moisture condenses on a
surface.
