Page |1
Solidworks CSWA Exam Questions with
Detailed Verified Answers (100% Correct
Answers) /Already Graded A+
Perpendicular
Ans: at an angle of 90° to a given line, plane, or surface.
Plane
Ans: Flat construction geometry. Can be used for a 2D sketch, section view of a model, and
others.
Vertex
Ans: A point at which two or more lines or edges intersect. Can be selected for sketching,
dimensioning, and many other operations.
Origin
Ans: Appears as three gray arrows and represents the (0,0,0) coordinate of the model.
Quadrant
Ans: the four quarters of the coordinate plane
Diameter
Ans: A straight line passing from side to side through the center of a circle or sphere.
Radius
Ans: A straight line from the center to the circumference of a circle or sphere.
, Page |2
Circumference
Ans: the perimeter of a circle
Arc
Ans: Part of a circle connecting two points on the circle.
Axis
Ans: A straight line that can be used to create model geometry, features, or patterns. Can be
made in a number of different ways, including using the intersection of two planes.
Symmetrical
Ans: made up of exactly similar parts facing each other or around an axis
Parallel
Ans: (of lines, planes, surfaces, or objects) side by side and having the same distance
continuously between them.
Tangent
Ans: A line in the plane of a circle that intersects the circle in exactly one point.
Filet
Ans: An internal rounding of a corner or edge in a sketch, or an edge on a surface or solid.
Chamfer
Ans: Bevels a selected edge or vertex. Can be applied to both sketches and features.
Section View
Solidworks CSWA Exam Questions with
Detailed Verified Answers (100% Correct
Answers) /Already Graded A+
Perpendicular
Ans: at an angle of 90° to a given line, plane, or surface.
Plane
Ans: Flat construction geometry. Can be used for a 2D sketch, section view of a model, and
others.
Vertex
Ans: A point at which two or more lines or edges intersect. Can be selected for sketching,
dimensioning, and many other operations.
Origin
Ans: Appears as three gray arrows and represents the (0,0,0) coordinate of the model.
Quadrant
Ans: the four quarters of the coordinate plane
Diameter
Ans: A straight line passing from side to side through the center of a circle or sphere.
Radius
Ans: A straight line from the center to the circumference of a circle or sphere.
, Page |2
Circumference
Ans: the perimeter of a circle
Arc
Ans: Part of a circle connecting two points on the circle.
Axis
Ans: A straight line that can be used to create model geometry, features, or patterns. Can be
made in a number of different ways, including using the intersection of two planes.
Symmetrical
Ans: made up of exactly similar parts facing each other or around an axis
Parallel
Ans: (of lines, planes, surfaces, or objects) side by side and having the same distance
continuously between them.
Tangent
Ans: A line in the plane of a circle that intersects the circle in exactly one point.
Filet
Ans: An internal rounding of a corner or edge in a sketch, or an edge on a surface or solid.
Chamfer
Ans: Bevels a selected edge or vertex. Can be applied to both sketches and features.
Section View
