Tattoo LiCENSE EXAM OR | COMPLETE QUESTIONS WITH 100%
RATED CORRECT ANSWERS | 2025 LATEST UPDATED | GET A+
When the armature bar is flat on the front coil, what is the smallest gap above the rear coil? -
(answers).010
What does a smaller gap above the rear coil cause? - (answers)More Power
What should armature bars be made of? - (answers)Plain Steel
How does a machine run if too much of the coil core is showing? - (answers)Hot
Where on the front spring should the contact screw be hitting? - (answers)Front or End of spring
你是想要一篇“眼睛容易阅读
What length of spring would run faster? - (answers)Short spring with a high angle
的”中文文章
What type of metal should the contact screw be made of to have the highest conductivity? -
(answers)Brass
How does the armature bar hit the front coil core? - (answers)Flat, full contact
What do you want the frame on your tattoo machine to be? - (answers)Non-conductive
What happens when your machine is conductive or electrified? - (answers)The armature bar
sticks to the coils causing the machine to stay in an "on" setting
What diameter should your binding post be? - (answers)5/16
,What happens if you use a steel contact screw? - (answers)Can cause unwanted spark
When setting up your machine, why would you "snug" down the eye of the needle bar? -
(answers)This helps to prevent weak and jumpy lines
Why is a one-piece contact screw the best choice? - (answers)Screws with things added on top
can add to the vibration
What are the two advantages to using a brass contact screw? - (answers)100% conductive and
keeps its shape longer than other choices
How much of the contact screw needs to be touching the front spring? - (answers)A tiny contact
area
Why should you use plain steel for a spring rather than a coated spring? - (answers)The coating
wears away quickly, which causes a bad connection
你是想要一篇“眼睛容易阅读
的”中文文章
What kind of reaction can you expect from a machine with a very low spring angle? -
(answers)Spongy and weak
Which type of machine benefits the best from a shorter spring? - (answers)A liner
Which spring is the most important for tuning the machine? - (answers)The rear spring
A machine that is very hard hitting and fast running moves the needle in and out of the skins so
fast that ____________________________________? - (answers)It doesn't leave enough
pigment behind
What is the ideal width of the springs used on the machine? - (answers)The springs should be
just as wide as the part that they are attached to
,What types of screws should you use to hold the coils to the frame? - (answers)Always use a
magnetic screw that sits flush to the frame
What is the function of the tube vise? - (answers)Firmly hold the tube in place and properly align
the tube while the machine is in use
How should a tube vise hold a tube in comparison to the machine? - (answers)Squarely front to
back and side to side
What is the most important part of a tattoo machine? - (answers)Coils
What is the purpose of the coils of a tattoo machine? - (answers)To run consistently and not lose
power
你是想要一篇“眼睛容易阅读
What is a possible reason for the machine to not work at all? - (answers)There is debris between
the contact screw and the front spring 的”中文文章
What can cause the coils to be in a constant "on" position? - (answers)A coil wire, soldering lug,
or any of the electrical circuit is touching the frame
What does your frame act as for the coil circuit? - (answers)The ground
What is not a purpose of the binding posts? - (answers)Electrical contact from the soldering lugs
to the contact screw
What is a safety feature of the cartridge needles? - (answers)If the cartridge is not installed in the
machine or tube, then the needles are not exposed; this limits the possibility of a needlestick
What does EPA stand for? - (answers)Environmental Protection Agency
, What does FDA stand for? - (answers)Food and Drug Administration
What does "high level disinfectant" mean? - (answers)A chemical agent, registered with the EPA,
which has demonstrated tuberculocidal activity
"Office" in the tattoo laws refers to what? - (answers)Health licensing Office
What attributes does a container have to have to be considered a "Sharps" container? -
(answers)Puncture-resistant, leak proof, labeled with a biohazard symbol
How many hours are part of the tattoo licensing program? - (answers)360 hours consisting of
210 theory hours and 150 practical hours
What does a completed procedure mean? - (answers)A tattoo which has been finished on a live
你是想要一篇“眼睛容易阅读
human being, including any touchups or additional work following initial healing, and the client
is released from service 的”中文文章
How long is a tattoo license active for? - (answers)1 year
What documents does one have to have to apply for a tattoo license? - (answers)Completed
application, bloodborne pathogen training certificate, CPR/first aid training certificate,
government issued id, second form of id, high school diploma or GED equivalent, and training
from a tattoo program approved by the Higher Education Coordinating Commission
How long is a temporary tattoo license good for? - (answers)Not to exceed 30 consecutive
calendar days
How many times in a 12-month period can one person apply for a temporary tattoo license? -
(answers)2
RATED CORRECT ANSWERS | 2025 LATEST UPDATED | GET A+
When the armature bar is flat on the front coil, what is the smallest gap above the rear coil? -
(answers).010
What does a smaller gap above the rear coil cause? - (answers)More Power
What should armature bars be made of? - (answers)Plain Steel
How does a machine run if too much of the coil core is showing? - (answers)Hot
Where on the front spring should the contact screw be hitting? - (answers)Front or End of spring
你是想要一篇“眼睛容易阅读
What length of spring would run faster? - (answers)Short spring with a high angle
的”中文文章
What type of metal should the contact screw be made of to have the highest conductivity? -
(answers)Brass
How does the armature bar hit the front coil core? - (answers)Flat, full contact
What do you want the frame on your tattoo machine to be? - (answers)Non-conductive
What happens when your machine is conductive or electrified? - (answers)The armature bar
sticks to the coils causing the machine to stay in an "on" setting
What diameter should your binding post be? - (answers)5/16
,What happens if you use a steel contact screw? - (answers)Can cause unwanted spark
When setting up your machine, why would you "snug" down the eye of the needle bar? -
(answers)This helps to prevent weak and jumpy lines
Why is a one-piece contact screw the best choice? - (answers)Screws with things added on top
can add to the vibration
What are the two advantages to using a brass contact screw? - (answers)100% conductive and
keeps its shape longer than other choices
How much of the contact screw needs to be touching the front spring? - (answers)A tiny contact
area
Why should you use plain steel for a spring rather than a coated spring? - (answers)The coating
wears away quickly, which causes a bad connection
你是想要一篇“眼睛容易阅读
的”中文文章
What kind of reaction can you expect from a machine with a very low spring angle? -
(answers)Spongy and weak
Which type of machine benefits the best from a shorter spring? - (answers)A liner
Which spring is the most important for tuning the machine? - (answers)The rear spring
A machine that is very hard hitting and fast running moves the needle in and out of the skins so
fast that ____________________________________? - (answers)It doesn't leave enough
pigment behind
What is the ideal width of the springs used on the machine? - (answers)The springs should be
just as wide as the part that they are attached to
,What types of screws should you use to hold the coils to the frame? - (answers)Always use a
magnetic screw that sits flush to the frame
What is the function of the tube vise? - (answers)Firmly hold the tube in place and properly align
the tube while the machine is in use
How should a tube vise hold a tube in comparison to the machine? - (answers)Squarely front to
back and side to side
What is the most important part of a tattoo machine? - (answers)Coils
What is the purpose of the coils of a tattoo machine? - (answers)To run consistently and not lose
power
你是想要一篇“眼睛容易阅读
What is a possible reason for the machine to not work at all? - (answers)There is debris between
the contact screw and the front spring 的”中文文章
What can cause the coils to be in a constant "on" position? - (answers)A coil wire, soldering lug,
or any of the electrical circuit is touching the frame
What does your frame act as for the coil circuit? - (answers)The ground
What is not a purpose of the binding posts? - (answers)Electrical contact from the soldering lugs
to the contact screw
What is a safety feature of the cartridge needles? - (answers)If the cartridge is not installed in the
machine or tube, then the needles are not exposed; this limits the possibility of a needlestick
What does EPA stand for? - (answers)Environmental Protection Agency
, What does FDA stand for? - (answers)Food and Drug Administration
What does "high level disinfectant" mean? - (answers)A chemical agent, registered with the EPA,
which has demonstrated tuberculocidal activity
"Office" in the tattoo laws refers to what? - (answers)Health licensing Office
What attributes does a container have to have to be considered a "Sharps" container? -
(answers)Puncture-resistant, leak proof, labeled with a biohazard symbol
How many hours are part of the tattoo licensing program? - (answers)360 hours consisting of
210 theory hours and 150 practical hours
What does a completed procedure mean? - (answers)A tattoo which has been finished on a live
你是想要一篇“眼睛容易阅读
human being, including any touchups or additional work following initial healing, and the client
is released from service 的”中文文章
How long is a tattoo license active for? - (answers)1 year
What documents does one have to have to apply for a tattoo license? - (answers)Completed
application, bloodborne pathogen training certificate, CPR/first aid training certificate,
government issued id, second form of id, high school diploma or GED equivalent, and training
from a tattoo program approved by the Higher Education Coordinating Commission
How long is a temporary tattoo license good for? - (answers)Not to exceed 30 consecutive
calendar days
How many times in a 12-month period can one person apply for a temporary tattoo license? -
(answers)2
