Page | 1
PA APPRAISERS LICENSE EXAM 2025
WITH 100% VERIFIED QUESTIONS AND
CORRECT SOLUTIONS
1. GR Pipe - Correct Answer - Runs Off The Header, Back Of
The Engine, Back To Air Intake And Back To Intake
Manifold
2. Rear Muffler - Correct Answer - Much Bigger, More Of An
Absorption
3. Tail Pipe - Correct Answer - Takes The Exhaust Gases
And Vents Out Of Vehicle
4. All Exhaust Systems - Correct Answer - Are Sectional
Designs; Bolted Together By Exhaust Flanges In-
Between Joints Are Gaskets
5. Most Common Type Of Steering - Correct Answer - Rack And
Pinion
, Page | 2
6. Rack - Correct Answer - Center Of Mechanism-
Constrained And Can Only Move In Straight Line
7. Pinion - Correct Answer - Makes The Rack Move
8. Steering Arm - Correct Answer - Attached
To Both Wheels Only Has Rotational
Movement
Connected To The Car Frame Via Roller Bearing For Turning
9. Tie Rod Connects The - Correct Answer - Steering Arm
To The Rack; Can Have Transitional And Rotational
Movement
10. When Rack Moves - Correct Answer - Wheels Turn At
Different Angles; Meeting Point Always Lies On The Rear
Wheel Line
11. Torque Converter - Correct Answer - In An Automatic
Transmission, This Automatically Varies The Amount Of
Torque Supplied
, Page | 3
12. Worm Screw - Correct Answer - Can Fit In Worm
Gear But Not The Opposite
13. PA Adjuster Fine - Correct Answer - Any Person Who
Violates Any Of The Provisions Of This Act Is Guilty Of A
Misdemeanor And Upon Conviction Thereof, For Each Offense,
Shall Be Sentenced To Pay A Fine Not Exceeding Five Hundred Dollars
($500), Or To Undergo Imprisonment Not Exceeding One Year, Or Both.
14. In Order For A "Full Release Settlement" To Become
Closed, What MUST Occur? - Correct Answer - The Claim
Check Must Be Cashed By The Claimant
15. Which Of The Following Terms Supports Insurable
Interest? - Correct Answer - Indemnity
16. What Makes Up The Front Body Section In Unibody
Designs? - Correct Answer - Upper Rail, Lower Rail,
Apron Assembly
17. High Mount Lamp Goes On When - Correct Answer
- Driver Hits The Brakes
, Page | 4
18. All The Following Are Methods Used By The Appraiser In
Determining The Value Of A Damaged Vehicle, EXCEPT: -
Correct Answer - A Five-State Average Value Is Correct.
19. In Order To Be Eligible For An Auto Appraiser
License, Which Of The Following Is NOT A
Requirement? - Correct Answer - To Have Been
Previously Employed By An Auto Manufacturer Is
Correct.
20. How Is A Diamond Condition Fixed? - Correct Answer
- By Pulling The Damage For Length. Diamond Is A
Length Condition.
21. When Measuring A Unibody Vehicle, It Is Discovered
That The Left Front Rail Is 111mm From Spec In Width.
What Condition Is This? - Correct Answer - Width Is
Calculated From The Center Out, So A Value Of -111mm
On The Left Rail Shows Sway To The Right And In Toward
Centerline.
22. A Collision Damaged Vehicle Is Discovered To Be
Down In Height At Opposite End Of The Center Section.
- Correct Answer - Twist Condition.
PA APPRAISERS LICENSE EXAM 2025
WITH 100% VERIFIED QUESTIONS AND
CORRECT SOLUTIONS
1. GR Pipe - Correct Answer - Runs Off The Header, Back Of
The Engine, Back To Air Intake And Back To Intake
Manifold
2. Rear Muffler - Correct Answer - Much Bigger, More Of An
Absorption
3. Tail Pipe - Correct Answer - Takes The Exhaust Gases
And Vents Out Of Vehicle
4. All Exhaust Systems - Correct Answer - Are Sectional
Designs; Bolted Together By Exhaust Flanges In-
Between Joints Are Gaskets
5. Most Common Type Of Steering - Correct Answer - Rack And
Pinion
, Page | 2
6. Rack - Correct Answer - Center Of Mechanism-
Constrained And Can Only Move In Straight Line
7. Pinion - Correct Answer - Makes The Rack Move
8. Steering Arm - Correct Answer - Attached
To Both Wheels Only Has Rotational
Movement
Connected To The Car Frame Via Roller Bearing For Turning
9. Tie Rod Connects The - Correct Answer - Steering Arm
To The Rack; Can Have Transitional And Rotational
Movement
10. When Rack Moves - Correct Answer - Wheels Turn At
Different Angles; Meeting Point Always Lies On The Rear
Wheel Line
11. Torque Converter - Correct Answer - In An Automatic
Transmission, This Automatically Varies The Amount Of
Torque Supplied
, Page | 3
12. Worm Screw - Correct Answer - Can Fit In Worm
Gear But Not The Opposite
13. PA Adjuster Fine - Correct Answer - Any Person Who
Violates Any Of The Provisions Of This Act Is Guilty Of A
Misdemeanor And Upon Conviction Thereof, For Each Offense,
Shall Be Sentenced To Pay A Fine Not Exceeding Five Hundred Dollars
($500), Or To Undergo Imprisonment Not Exceeding One Year, Or Both.
14. In Order For A "Full Release Settlement" To Become
Closed, What MUST Occur? - Correct Answer - The Claim
Check Must Be Cashed By The Claimant
15. Which Of The Following Terms Supports Insurable
Interest? - Correct Answer - Indemnity
16. What Makes Up The Front Body Section In Unibody
Designs? - Correct Answer - Upper Rail, Lower Rail,
Apron Assembly
17. High Mount Lamp Goes On When - Correct Answer
- Driver Hits The Brakes
, Page | 4
18. All The Following Are Methods Used By The Appraiser In
Determining The Value Of A Damaged Vehicle, EXCEPT: -
Correct Answer - A Five-State Average Value Is Correct.
19. In Order To Be Eligible For An Auto Appraiser
License, Which Of The Following Is NOT A
Requirement? - Correct Answer - To Have Been
Previously Employed By An Auto Manufacturer Is
Correct.
20. How Is A Diamond Condition Fixed? - Correct Answer
- By Pulling The Damage For Length. Diamond Is A
Length Condition.
21. When Measuring A Unibody Vehicle, It Is Discovered
That The Left Front Rail Is 111mm From Spec In Width.
What Condition Is This? - Correct Answer - Width Is
Calculated From The Center Out, So A Value Of -111mm
On The Left Rail Shows Sway To The Right And In Toward
Centerline.
22. A Collision Damaged Vehicle Is Discovered To Be
Down In Height At Opposite End Of The Center Section.
- Correct Answer - Twist Condition.
