TEEX HAZMAT TECH WITH CORRECT AND
VERIFIED ANSWERS YEAR 2024/2025
Within the Incident Command Structure, This Section supports
the overall strategic plan, works on all tactical objectives, and is
accountable for all resources under its control. - verified
answers-Operations Section
Who has the authority to alter, suspend, and terminate any
unsafe activity on the emergency scene? - verified answers-
The safety officer
By law, OSHA requires how many people to serve as backup to
the team working in the hot zone? - verified answers-2
What command function is responsible for establishing hazard
control zones and monitoring the movement of personnel and
equipment between those zones as well as monitoring all
egress routes at the incident site and making sure
contamination does not occur - verified answers-Site Access
Control
What function must be operational before the entry team is
allowed to enter? - verified answers-Decontamination.
The decon team wears the same level of respiratory protection
as the entry team but can wear what level for skin protection? -
verified answers-The decon team can wear one level below for
skin protection
Emergency procedures must be established for?
X4 - verified answers--Loss of air supply
-Loss of suit integrity
-Loss of verbal communication; and
- Buddy down in the hot zone
,what must personnel in the hot zone do if they experience a
loss of air supply - verified answers-Exit the hot zone
immediately and proceed to emergency decon
what must personnel in the hot zone do if they experience loss
of suit integrity ? - verified answers-Exit the hot zone
immediately and proceed to emergency decon
What should the entry team do if they experience a loss of
verbal communication - verified answers-Exit the hot zone
immediately and proceed to decon.
What is the NFPA Standard on Selection, care and
maintenance of Open-Circuit Self containing Breathing
apparatus? - verified answers-NFPA 1852
What is the NFPA Standard on Selection, care, and
maintenance of Hazardous materials, CBRN, and Emergency
medical operations clothing and equipment. - verified answers-
NFPA 1891
Records should be maintained on each suits ? inspection, use
conditions, and ________? . - verified answers-Repair Status
How should protective clothing be hung? - verified answers-In
accordance with manufacturer's instruction.
What are the three methods for overpacking a drum? - verified
answers--Rolling Slide-in Method
-Slide in Method
-Slip-Over Method
What is a major safety consideration regarding overpacking a
radioactive container? - verified answers-Ensure the overpack
and material are compatible.
,What is required after sealing the lid of an overpack - verified
answers-Proper labeling and marking of the overpack
What is the most common overpack for a pressure vessel ? -
verified answers-The Cylinder coffin formerly known as
Emergency Response Containment Vessel (ERCV)
What materials can be stored in the cylinder coffin - verified
answers-Was originally designed for chlorine but can now be
used for any gas with a pressure of less than 250 psi.
What is a consideration when using the cylinder coffin with
other materials? - verified answers-It has a Viton O-ring that
must be changed if it is used for other gases like Ammonia or
the amines
Confined space atmospheres may have which hazards ?
X3 - verified answers--Oxygen-deficient
-Toxic
-Flammable
or a combination of all of them
Product transfer and removal should be supervised by? -
verified answers-The technician level responder
Why is it important that a compatible recovery container is
used? - verified answers-So the problem is not compounded
and made worse due to a reaction between incompatible
products.
In regards to grounding and bonding during product transfer
operations, how many ohms is acceptable ? - verified answers-
The target resistance for ohms should remain below 1,000
ohms
, In regards to grounding and bonding during product transfer
operations.
Check the continuity to ensure no more than ______ ohm
resistance - verified answers-Check the continuity to ensure no
more than 25 ohm resistance
Which tankers have the ability to remove product via gravity
transfer?
X2 - verified answers--MC 306/ DOT 406
-MC 307/ DOT 407
This is a multi step process that takes responders or victims
from contaminated to clean and includes gross & secondary
decon - verified answers-Technical Decon
Mass Decontamination is a __________ Decontamination -
verified answers-Gross
What is a disadvantage of Mass Decon - verified answers-
Resources available to seperate men/women/children
What is Priority 1: Life threatening injuries. - verified answers-
Red (Immediate)
What is Priority 2: Serious but not life threatening injuries -
verified answers-Yellow (Delayed)
What is Priority 3 : Ambulatory victims - verified answers-Green
( Minor)
What is priority 4: Deceased - verified answers-Black
(Deceased)
When should emergency decon be established? - verified
answers-Prior to making entry into the hot zone
VERIFIED ANSWERS YEAR 2024/2025
Within the Incident Command Structure, This Section supports
the overall strategic plan, works on all tactical objectives, and is
accountable for all resources under its control. - verified
answers-Operations Section
Who has the authority to alter, suspend, and terminate any
unsafe activity on the emergency scene? - verified answers-
The safety officer
By law, OSHA requires how many people to serve as backup to
the team working in the hot zone? - verified answers-2
What command function is responsible for establishing hazard
control zones and monitoring the movement of personnel and
equipment between those zones as well as monitoring all
egress routes at the incident site and making sure
contamination does not occur - verified answers-Site Access
Control
What function must be operational before the entry team is
allowed to enter? - verified answers-Decontamination.
The decon team wears the same level of respiratory protection
as the entry team but can wear what level for skin protection? -
verified answers-The decon team can wear one level below for
skin protection
Emergency procedures must be established for?
X4 - verified answers--Loss of air supply
-Loss of suit integrity
-Loss of verbal communication; and
- Buddy down in the hot zone
,what must personnel in the hot zone do if they experience a
loss of air supply - verified answers-Exit the hot zone
immediately and proceed to emergency decon
what must personnel in the hot zone do if they experience loss
of suit integrity ? - verified answers-Exit the hot zone
immediately and proceed to emergency decon
What should the entry team do if they experience a loss of
verbal communication - verified answers-Exit the hot zone
immediately and proceed to decon.
What is the NFPA Standard on Selection, care and
maintenance of Open-Circuit Self containing Breathing
apparatus? - verified answers-NFPA 1852
What is the NFPA Standard on Selection, care, and
maintenance of Hazardous materials, CBRN, and Emergency
medical operations clothing and equipment. - verified answers-
NFPA 1891
Records should be maintained on each suits ? inspection, use
conditions, and ________? . - verified answers-Repair Status
How should protective clothing be hung? - verified answers-In
accordance with manufacturer's instruction.
What are the three methods for overpacking a drum? - verified
answers--Rolling Slide-in Method
-Slide in Method
-Slip-Over Method
What is a major safety consideration regarding overpacking a
radioactive container? - verified answers-Ensure the overpack
and material are compatible.
,What is required after sealing the lid of an overpack - verified
answers-Proper labeling and marking of the overpack
What is the most common overpack for a pressure vessel ? -
verified answers-The Cylinder coffin formerly known as
Emergency Response Containment Vessel (ERCV)
What materials can be stored in the cylinder coffin - verified
answers-Was originally designed for chlorine but can now be
used for any gas with a pressure of less than 250 psi.
What is a consideration when using the cylinder coffin with
other materials? - verified answers-It has a Viton O-ring that
must be changed if it is used for other gases like Ammonia or
the amines
Confined space atmospheres may have which hazards ?
X3 - verified answers--Oxygen-deficient
-Toxic
-Flammable
or a combination of all of them
Product transfer and removal should be supervised by? -
verified answers-The technician level responder
Why is it important that a compatible recovery container is
used? - verified answers-So the problem is not compounded
and made worse due to a reaction between incompatible
products.
In regards to grounding and bonding during product transfer
operations, how many ohms is acceptable ? - verified answers-
The target resistance for ohms should remain below 1,000
ohms
, In regards to grounding and bonding during product transfer
operations.
Check the continuity to ensure no more than ______ ohm
resistance - verified answers-Check the continuity to ensure no
more than 25 ohm resistance
Which tankers have the ability to remove product via gravity
transfer?
X2 - verified answers--MC 306/ DOT 406
-MC 307/ DOT 407
This is a multi step process that takes responders or victims
from contaminated to clean and includes gross & secondary
decon - verified answers-Technical Decon
Mass Decontamination is a __________ Decontamination -
verified answers-Gross
What is a disadvantage of Mass Decon - verified answers-
Resources available to seperate men/women/children
What is Priority 1: Life threatening injuries. - verified answers-
Red (Immediate)
What is Priority 2: Serious but not life threatening injuries -
verified answers-Yellow (Delayed)
What is Priority 3 : Ambulatory victims - verified answers-Green
( Minor)
What is priority 4: Deceased - verified answers-Black
(Deceased)
When should emergency decon be established? - verified
answers-Prior to making entry into the hot zone
