IFT Exam UPDATED ACTUAL Exam
Questions and CORRECT Answers
`Two connected routers are configured with RIP routing. What will be the result when a router
receives a routing update that contains a higher-cost path to a network already in its routing table
- CORRECT ANSWER - B. The update will be ignored and no further action will occur
When a routing update is received by a router, the router first checks the administrative distance
(AD) and always chooses the route with the lowest AD. However, if two routes are received and
they both have the same AD, then the router will choose the one route with the lowest metrics, or
in RIP's case, hop count.
An SNMP agent can send _______ messages.
Group of answer choices - CORRECT ANSWER - Response Messages
Which of the following performs dynamic IP addressing? - CORRECT ANSWER -
Dynamic Host Configuration Protocol (DHCP)
Tricking people into revealing their password by pretending to be legitimate users or members of
a company in need of information is called: - CORRECT ANSWER - Social Engineering
A dynamic table is one _______. - CORRECT ANSWER - Which is updated
automatically
With Windows, what can you use to verify that Windows recognizes a NIC and is ready to use it?
- CORRECT ANSWER - Device Manager
The time required by routing protocols to update their forwarding tables after changes have
occurred are called what? - CORRECT ANSWER - Convergence
Which of the following port ranges is described as "well known"? - CORRECT
ANSWER - 0 to 1023
,What does a router do with a packet that it does not have a destination network for? - CORRECT
ANSWER - Drops the packet
The router firstly look the destination address on a packet then it try to find match in routing
table if matches found then it send that to the destination.if no matches found then the packet is
dropped and sends an ICMP message to the source that tells it doesn't have a route to the
destination.
What are you trying to discover when you test a cable for continuity? - CORRECT
ANSWER - A broken wire
Which utility will display a list of all the routers that a packet passes through on the way to an IP
destination? - CORRECT ANSWER - Tracert
What term is used by routers to describe each step necessary to reach a destination? - CORRECT
ANSWER - A Hop
Which of the following is a distance-vector routing protocol used on TCP/IP networks? -
CORRECT ANSWER - RIP
When all routers in a network agree on the path from one point to another, the network is said to
be what? - CORRECT ANSWER - Converged (When routing tables are complete, they
include information on ALL networks in the Internetwork.
Which statement is true concerning wireless bridges? - CORRECT ANSWER - Connects
two networks with a wireless link
Which kind of malware typically resides in a larger, innocent computer program - CORRECT
ANSWER - Computer Virus
The metric used by _______ is the hop count. - CORRECT ANSWER - RIP
, Which is true regarding dynamic routing? - CORRECT ANSWER - Dynamic routes are
automatically added to the routing table.
A manager is a host that runs the SNMP _______ process. - CORRECT ANSWER - Client
Which one of the following routing metrics determines the largest frame a particular technology
can handle? - CORRECT ANSWER - MTU
Select the two wireless network modes (Select Two) - CORRECT ANSWER - Ad Hoc &
Infrastructure
Which of the following is a link-state routing protocol used on TCP/IP networks? - CORRECT
ANSWER - OSPF is a link-state routing protocol used on TCP/IP networks
Which two of the following are true regarding the distance-vector and link-state routing
protocols?
1. Link state sends its complete routing table out all active interfaces on periodic time intervals.
2. Distance vector sends its complete routing table out all active interfaces on periodic time
intervals.
3. Link state sends updates containing the state of its own links to all routers in the internetwork.
4. Distance vector sends updates containing the state of its own links to all routers in the
internetwork. - CORRECT ANSWER - 2 & 3 Only
What access-point feature allows a network administrator to define what type of data can enter
the wireless network? - CORRECT ANSWER - traffic filtering
What is the difference between using open authentication and pre-shared keys? - CORRECT
ANSWER - Pre-shared keys require an encrypted secret word. Open authentication does
not require a secret word.
Questions and CORRECT Answers
`Two connected routers are configured with RIP routing. What will be the result when a router
receives a routing update that contains a higher-cost path to a network already in its routing table
- CORRECT ANSWER - B. The update will be ignored and no further action will occur
When a routing update is received by a router, the router first checks the administrative distance
(AD) and always chooses the route with the lowest AD. However, if two routes are received and
they both have the same AD, then the router will choose the one route with the lowest metrics, or
in RIP's case, hop count.
An SNMP agent can send _______ messages.
Group of answer choices - CORRECT ANSWER - Response Messages
Which of the following performs dynamic IP addressing? - CORRECT ANSWER -
Dynamic Host Configuration Protocol (DHCP)
Tricking people into revealing their password by pretending to be legitimate users or members of
a company in need of information is called: - CORRECT ANSWER - Social Engineering
A dynamic table is one _______. - CORRECT ANSWER - Which is updated
automatically
With Windows, what can you use to verify that Windows recognizes a NIC and is ready to use it?
- CORRECT ANSWER - Device Manager
The time required by routing protocols to update their forwarding tables after changes have
occurred are called what? - CORRECT ANSWER - Convergence
Which of the following port ranges is described as "well known"? - CORRECT
ANSWER - 0 to 1023
,What does a router do with a packet that it does not have a destination network for? - CORRECT
ANSWER - Drops the packet
The router firstly look the destination address on a packet then it try to find match in routing
table if matches found then it send that to the destination.if no matches found then the packet is
dropped and sends an ICMP message to the source that tells it doesn't have a route to the
destination.
What are you trying to discover when you test a cable for continuity? - CORRECT
ANSWER - A broken wire
Which utility will display a list of all the routers that a packet passes through on the way to an IP
destination? - CORRECT ANSWER - Tracert
What term is used by routers to describe each step necessary to reach a destination? - CORRECT
ANSWER - A Hop
Which of the following is a distance-vector routing protocol used on TCP/IP networks? -
CORRECT ANSWER - RIP
When all routers in a network agree on the path from one point to another, the network is said to
be what? - CORRECT ANSWER - Converged (When routing tables are complete, they
include information on ALL networks in the Internetwork.
Which statement is true concerning wireless bridges? - CORRECT ANSWER - Connects
two networks with a wireless link
Which kind of malware typically resides in a larger, innocent computer program - CORRECT
ANSWER - Computer Virus
The metric used by _______ is the hop count. - CORRECT ANSWER - RIP
, Which is true regarding dynamic routing? - CORRECT ANSWER - Dynamic routes are
automatically added to the routing table.
A manager is a host that runs the SNMP _______ process. - CORRECT ANSWER - Client
Which one of the following routing metrics determines the largest frame a particular technology
can handle? - CORRECT ANSWER - MTU
Select the two wireless network modes (Select Two) - CORRECT ANSWER - Ad Hoc &
Infrastructure
Which of the following is a link-state routing protocol used on TCP/IP networks? - CORRECT
ANSWER - OSPF is a link-state routing protocol used on TCP/IP networks
Which two of the following are true regarding the distance-vector and link-state routing
protocols?
1. Link state sends its complete routing table out all active interfaces on periodic time intervals.
2. Distance vector sends its complete routing table out all active interfaces on periodic time
intervals.
3. Link state sends updates containing the state of its own links to all routers in the internetwork.
4. Distance vector sends updates containing the state of its own links to all routers in the
internetwork. - CORRECT ANSWER - 2 & 3 Only
What access-point feature allows a network administrator to define what type of data can enter
the wireless network? - CORRECT ANSWER - traffic filtering
What is the difference between using open authentication and pre-shared keys? - CORRECT
ANSWER - Pre-shared keys require an encrypted secret word. Open authentication does
not require a secret word.
