Correct!!
/muck – Ans -A-8 Material
/.LBR – Ans -Strength test of material based on standardized 800 psi
/.Select – Ans -Material that can be used anywhere in the the embankment
/.one – Ans -number of density log books per contact
/.verification – Ans -testing done by department
/.dry – Ans -blank density is the weight of solid should
/.lot – Ans -a single lift of finished material
/.cover zone – Ans -area from the bottom of the pipe to 12 inches above
/.resolution – Ans -testing to resolve QC & VT differences
/.High Plastic – Ans -Material with LL greater than 50
/.Wet Density – Ans -weight of soil and water
/.Modified Proctor – Ans -Proctor usually used for subgrade and base. FM1-T180
/.control line – Ans -set by normal shoulder points
/.Quality Control – Ans -Plan prepared by contractor
/.Bedding Zone – Ans -Zone directly beneath the pipe.
/.Standard Proctor – Ans -protor typically used for embankment material. AASHTO T-99
/.Lift – Ans -6inches of compacted material cor full width.
/.2 pounds per cubic feet – Ans -comparison difference for gages of same
manufacturers
/.3 pounds per cubic feet – Ans -comparison difference for gages of different
manufacturers.