1
VIVINT SHP PRACTICE EXAM / QUESTIONS AND
CORRECT ANSWERS 2024/2025 GRADED A+.
True or false the fire fighter may be installed next to a standalone battery
powered smoke detector - (answers)False
True or false when performing a full system test you may bypass any open doors
or windows - (answers)False
When programming and SKEY1 you must: - (answers)Always enable the
emergency key
True or false when running power to the take-345, polarity does not matter -
(answers)False
Select all that apply when programming the emergency key for SKEY1 one which
zone/sensor types are recommended to use - (answers)Audible alarm 07 auxiliary
alarm 08
True or false when installing a SMKT3 you must use the included screws and
anchors - (answers)True
True or false when installing the fire fighter it is required to test the customers
existing smoke detectors - (answers)True
, 2
When installing a DW 21 where is the approved location for the sensor -
(answers)Between 6 inches (15cm) and 2 inches (61cm) from the floor
When installing a DW11 on a vinyl or metal frame what should you primarily use
to mount the sensor - (answers)Provided double-sided tape
Select all that apply which of the following materials can you use to group
multiple ground terminals in the takeover module - (answers)B connectors/beans
and Wire caps
Which of the following sensors are not allowed to program using a translator -
(answers)Smoke detector
True or false when installing the take 345 you must always test the new 12 V
battery before using it - (answers)True
What is the output voltage of the transformer used to power the Smart hub -
(answers)12 VDC
What is the minimum distance for placement of a CO3 from the corners on a wall
- (answers)12 inches (30 cm)
True or false the SMK3 has only two functions: smoke and heat detection -
(answers)False
VIVINT SHP PRACTICE EXAM / QUESTIONS AND
CORRECT ANSWERS 2024/2025 GRADED A+.
True or false the fire fighter may be installed next to a standalone battery
powered smoke detector - (answers)False
True or false when performing a full system test you may bypass any open doors
or windows - (answers)False
When programming and SKEY1 you must: - (answers)Always enable the
emergency key
True or false when running power to the take-345, polarity does not matter -
(answers)False
Select all that apply when programming the emergency key for SKEY1 one which
zone/sensor types are recommended to use - (answers)Audible alarm 07 auxiliary
alarm 08
True or false when installing a SMKT3 you must use the included screws and
anchors - (answers)True
True or false when installing the fire fighter it is required to test the customers
existing smoke detectors - (answers)True
, 2
When installing a DW 21 where is the approved location for the sensor -
(answers)Between 6 inches (15cm) and 2 inches (61cm) from the floor
When installing a DW11 on a vinyl or metal frame what should you primarily use
to mount the sensor - (answers)Provided double-sided tape
Select all that apply which of the following materials can you use to group
multiple ground terminals in the takeover module - (answers)B connectors/beans
and Wire caps
Which of the following sensors are not allowed to program using a translator -
(answers)Smoke detector
True or false when installing the take 345 you must always test the new 12 V
battery before using it - (answers)True
What is the output voltage of the transformer used to power the Smart hub -
(answers)12 VDC
What is the minimum distance for placement of a CO3 from the corners on a wall
- (answers)12 inches (30 cm)
True or false the SMK3 has only two functions: smoke and heat detection -
(answers)False
