2/6/25, 7:27 AM Level 1: NACE CIP Level 1 Study Guide (2025) Actual exam test|comprehensive questions and verified answers| get it 100% A…
Level 1: NACE CIP Level 1 Study Guide (2025)
Actual exam test|comprehensive questions and
verified answers| get it 100% ACCURATE!!
Save
Terms in this set (105)
The deterioration of a substance, usually a metal
Define Corrosion
from a reaction with its environment
A layer of oxides formed on the surface of a metal
What is passivation?
that provides corrosion protection.
What is an example of Stainless Steel
passivation?
What are the elements of Anode, Cathode, Metallic Pathway, Electrolyte
a corrosion cell?
Describe what happens The metal dissolves into the electrolyte
at the anode.
What is the function of Allows the passage of ions to connect the corrosion
the electrolyte? cell
What is the function of Allows the flow of electrons to connect the
the metallic pathway? corrosion cell
What is the galvanic A listing of metals in order of reactivity (more or less
series? noble) in seawater at 25 C
The less noble (or more reactive) metal when
The general rules of
connected to a more noble (or less reactive metal)
galvanic corrosion are:
will corrode preferentially
https://quizlet.com/1002276906/level-1-nace-cip-level-1-study-guide-2025-actual-exam-testcomprehensive-questions-and-verified-answers-get-it… 1/12
, 2/6/25, 7:27 AM Level 1: NACE CIP Level 1 Study Guide (2025) Actual exam test|comprehensive questions and verified answers| get it 100% A…
Name the five most Humidity, oxygen, chemical salts, pollutants,
important factors that temperature
affect the rate of
corrosion.
Results in a relatively uniform loss of material over
the entire surface, Results in a general thinning of
General corrosion is:
the affected surface, Relatively easy to inspect,
Does not casue catastrophic failures
Typically pitting and crevice corrosion. It is typically
Localized corrosion is: of the most concern as damage is concentrated and
loss of integrity or structural failure can result.
List some of the common Design, Inhibitors, Material Selection, Cathodic
tools/methods used for Protection, Protective Coatings, Splash Zone
corrosion control. Systems, Alteration of the Environment
The inspector's role is that of a quality control
How does NACE define technician responsible for observing and reporting
the inspector's role? conformance or deviation from the project
specification.
What is the inspector's Safety enforcement is not the responsibility of the
responsibility when it inspector; however, it is his/her responsibility to
comes to safety on the report any issues that may affect the project.
project?
Name some tests that Temperature, Relative Humidity, Dew Point, Anchor
may need to be Profile, Surface Cleanliness
conducted during
surface preparation and
coating operations.
Name some of the Daily/weekly summary, material usage reports,
documentation/reports manpower and equipment, non conformance, and
that may be required to conformance
be maintained on a
coatings project.
What are the most Objective, Accurate, and Detailed.
important characteristics
of a good report?
https://quizlet.com/1002276906/level-1-nace-cip-level-1-study-guide-2025-actual-exam-testcomprehensive-questions-and-verified-answers-get-it… 2/12
Level 1: NACE CIP Level 1 Study Guide (2025)
Actual exam test|comprehensive questions and
verified answers| get it 100% ACCURATE!!
Save
Terms in this set (105)
The deterioration of a substance, usually a metal
Define Corrosion
from a reaction with its environment
A layer of oxides formed on the surface of a metal
What is passivation?
that provides corrosion protection.
What is an example of Stainless Steel
passivation?
What are the elements of Anode, Cathode, Metallic Pathway, Electrolyte
a corrosion cell?
Describe what happens The metal dissolves into the electrolyte
at the anode.
What is the function of Allows the passage of ions to connect the corrosion
the electrolyte? cell
What is the function of Allows the flow of electrons to connect the
the metallic pathway? corrosion cell
What is the galvanic A listing of metals in order of reactivity (more or less
series? noble) in seawater at 25 C
The less noble (or more reactive) metal when
The general rules of
connected to a more noble (or less reactive metal)
galvanic corrosion are:
will corrode preferentially
https://quizlet.com/1002276906/level-1-nace-cip-level-1-study-guide-2025-actual-exam-testcomprehensive-questions-and-verified-answers-get-it… 1/12
, 2/6/25, 7:27 AM Level 1: NACE CIP Level 1 Study Guide (2025) Actual exam test|comprehensive questions and verified answers| get it 100% A…
Name the five most Humidity, oxygen, chemical salts, pollutants,
important factors that temperature
affect the rate of
corrosion.
Results in a relatively uniform loss of material over
the entire surface, Results in a general thinning of
General corrosion is:
the affected surface, Relatively easy to inspect,
Does not casue catastrophic failures
Typically pitting and crevice corrosion. It is typically
Localized corrosion is: of the most concern as damage is concentrated and
loss of integrity or structural failure can result.
List some of the common Design, Inhibitors, Material Selection, Cathodic
tools/methods used for Protection, Protective Coatings, Splash Zone
corrosion control. Systems, Alteration of the Environment
The inspector's role is that of a quality control
How does NACE define technician responsible for observing and reporting
the inspector's role? conformance or deviation from the project
specification.
What is the inspector's Safety enforcement is not the responsibility of the
responsibility when it inspector; however, it is his/her responsibility to
comes to safety on the report any issues that may affect the project.
project?
Name some tests that Temperature, Relative Humidity, Dew Point, Anchor
may need to be Profile, Surface Cleanliness
conducted during
surface preparation and
coating operations.
Name some of the Daily/weekly summary, material usage reports,
documentation/reports manpower and equipment, non conformance, and
that may be required to conformance
be maintained on a
coatings project.
What are the most Objective, Accurate, and Detailed.
important characteristics
of a good report?
https://quizlet.com/1002276906/level-1-nace-cip-level-1-study-guide-2025-actual-exam-testcomprehensive-questions-and-verified-answers-get-it… 2/12
