BCIT SAFETY A-1 -> A-
8
Eight practices that will make using basic hand tools safe correct
answers1.) Always use proper tools for the job
2) keep hand tools clean, sharp, in good condition.
3) Never leave tools where they proturude or can strike someone.
4) Never File or rasp without a handle
5) Return tools to proper place when not in use
6) Always wear safety goggles or a face sheild
7) Wear goggles or a face sheild
8) When using sharp-edged tools, always cut away from your body
A Ladder must project m ( feet) above the upper landing to which it
provides access correct answers1 meter (3 feet)
When can silver solder continaing cadmium be used? correct answersSilver
soildering caintaining cadmium must not be used without prior approval
from the board
Workers should know the location of shutoffs for the gas and water so they
can: correct answersTurn off the gas or water in an emergency
shoring should extend Above the ground level correct answers1 foot
How many Fire extingushers are required where weilding or cutting is
done correct answersAt least one fire extinguisher is required when
welding or cutting
What distance should the basic of ladder be from the wall when compared to
the ladder height correct answers of the height
A worker must not work from the top ( ) rungs of a ladder correct
answers2
Only a qualifed person may handle or use a powder actuated tool correct
answerstrue
A powder - actuated tool must not be driven: correct answers1.) Within
1/2" from the edge of the steel base
9) within 2" of the weld
10)into a spalled concerte surface
What type of footwear should you wear when welding correct
answerssubstantiable footwear made of leather or other suitable material
when welding
Someone working overhead correct answersbe extremely cautions and
wear a hard hat
, Dust in the air correct answerswear repirator to protect throat, lungs,
goggles to protect eyes or combination respirator - goggles
Rings and metal watchbands correct answersThey conduct electricity -
become very hot if you touch electrical equipment
Loud noises correct answerswear hearing protectors: earplus / earmuffs
Long hair correct answersCan catch fire or get caught in rotating machinery
- keep long hair restrained with a hairnet or hat
Loose clothing correct answersDo NOT wear loose clothing: may get caught
in moving machinery
The employer correct answerswho must provide
workers the info, instruction, training, and
supervision necessary.
To ensure the health and safety of those workers in carrying out their
work and to ensure health & safety of other workers.
within what time period must a worker report an accident or
injury? correct answersshould be reported immediately after the
event.
What is required if there is a danger of tools or materials falling off the
edge of a work platform? correct answerstoe boards
What is the pressure limitation for compressed air when blowing dust
from a workers clothing correct answers70 KPA - 10 PSIG
in what lenght of time must an employer report a serious injurt to
WORKSAFE BC? correct answerswithin 3 days (72 hours)
A person who instructs direct and controls workers in the performance of
ther duties correct answerssupervisor
Oil or grease on the floor correct answersReal hazard - wipe up the spill
before you or someone else slips and are injured.
cluttered workbenches correct answersYou might knock over a container of
liquid or knock something off the bench into the floor either situation can
cause damage or injury.
Explain the term "Appropriate appeal" correct answersWell - fitting clothing:
good quality not baggy
long sleeve on shirts
8
Eight practices that will make using basic hand tools safe correct
answers1.) Always use proper tools for the job
2) keep hand tools clean, sharp, in good condition.
3) Never leave tools where they proturude or can strike someone.
4) Never File or rasp without a handle
5) Return tools to proper place when not in use
6) Always wear safety goggles or a face sheild
7) Wear goggles or a face sheild
8) When using sharp-edged tools, always cut away from your body
A Ladder must project m ( feet) above the upper landing to which it
provides access correct answers1 meter (3 feet)
When can silver solder continaing cadmium be used? correct answersSilver
soildering caintaining cadmium must not be used without prior approval
from the board
Workers should know the location of shutoffs for the gas and water so they
can: correct answersTurn off the gas or water in an emergency
shoring should extend Above the ground level correct answers1 foot
How many Fire extingushers are required where weilding or cutting is
done correct answersAt least one fire extinguisher is required when
welding or cutting
What distance should the basic of ladder be from the wall when compared to
the ladder height correct answers of the height
A worker must not work from the top ( ) rungs of a ladder correct
answers2
Only a qualifed person may handle or use a powder actuated tool correct
answerstrue
A powder - actuated tool must not be driven: correct answers1.) Within
1/2" from the edge of the steel base
9) within 2" of the weld
10)into a spalled concerte surface
What type of footwear should you wear when welding correct
answerssubstantiable footwear made of leather or other suitable material
when welding
Someone working overhead correct answersbe extremely cautions and
wear a hard hat
, Dust in the air correct answerswear repirator to protect throat, lungs,
goggles to protect eyes or combination respirator - goggles
Rings and metal watchbands correct answersThey conduct electricity -
become very hot if you touch electrical equipment
Loud noises correct answerswear hearing protectors: earplus / earmuffs
Long hair correct answersCan catch fire or get caught in rotating machinery
- keep long hair restrained with a hairnet or hat
Loose clothing correct answersDo NOT wear loose clothing: may get caught
in moving machinery
The employer correct answerswho must provide
workers the info, instruction, training, and
supervision necessary.
To ensure the health and safety of those workers in carrying out their
work and to ensure health & safety of other workers.
within what time period must a worker report an accident or
injury? correct answersshould be reported immediately after the
event.
What is required if there is a danger of tools or materials falling off the
edge of a work platform? correct answerstoe boards
What is the pressure limitation for compressed air when blowing dust
from a workers clothing correct answers70 KPA - 10 PSIG
in what lenght of time must an employer report a serious injurt to
WORKSAFE BC? correct answerswithin 3 days (72 hours)
A person who instructs direct and controls workers in the performance of
ther duties correct answerssupervisor
Oil or grease on the floor correct answersReal hazard - wipe up the spill
before you or someone else slips and are injured.
cluttered workbenches correct answersYou might knock over a container of
liquid or knock something off the bench into the floor either situation can
cause damage or injury.
Explain the term "Appropriate appeal" correct answersWell - fitting clothing:
good quality not baggy
long sleeve on shirts
