bunks
Give this one a try later!
Wooden supports on which the vessel rests while on the trailer
,Float Plan for Extended Outings
Give this one a try later!
describes vessel, including its registration number, length, make,
horsepower, and engine type, Includes the description and license plate
of the tow vehicle and trailer, Gives the number of passengers, their names
and addresses, and a contact in case of emergency, States where you are
going, the detailed route, your planned departure time, and your expected
return time. Include the location of all stopping points, dates, and times,
Gives the phone number for local authorities in case you fail to return
when expected. If boating on waters under U.S. Coast Guard jurisdiction,
give the phone number of the U.S. Coast Guard.
If the tongue weight is too heavy,
Give this one a try later!
the rear wheels of the towing vehicle will be weighted down, making it
difficult to steer.
Stern drives are known also as ____________ because they combine features found on
both
Give this one a try later!
inboard/outboards (I/Os)
,stern
Give this one a try later!
Rear of a vessel
Class 1
Give this one a try later!
16 feet to less than 26 feet
Deep-Vee Hull
Give this one a try later!
Gives a smoother ride than a flat-bottomed hull in rough water but Takes
more power to move at the same speed as flat-bottomed hulls. May roll or
bank in sharp turns.
Two types of Hulls
Give this one a try later!
displacement and planing
, planing hulls are
Give this one a try later!
designed to rise up and glide on top of the water when enough power is
supplied. These boats may operate like displacement hulls when at rest or
at slow speeds but climb toward the surface of the water as they move
faster.
Cleat
Give this one a try later!
Metal fitting on which a rope can be fastened
drive shaft
Give this one a try later!
The long stem connection between the motor and the impeller
Jet drives also may power
____________ and are used commonly for vessels designed for shallow water conditions.
Jet boats can have inboard or outboard jet drives.
Give this one a try later!
Give this one a try later!
Wooden supports on which the vessel rests while on the trailer
,Float Plan for Extended Outings
Give this one a try later!
describes vessel, including its registration number, length, make,
horsepower, and engine type, Includes the description and license plate
of the tow vehicle and trailer, Gives the number of passengers, their names
and addresses, and a contact in case of emergency, States where you are
going, the detailed route, your planned departure time, and your expected
return time. Include the location of all stopping points, dates, and times,
Gives the phone number for local authorities in case you fail to return
when expected. If boating on waters under U.S. Coast Guard jurisdiction,
give the phone number of the U.S. Coast Guard.
If the tongue weight is too heavy,
Give this one a try later!
the rear wheels of the towing vehicle will be weighted down, making it
difficult to steer.
Stern drives are known also as ____________ because they combine features found on
both
Give this one a try later!
inboard/outboards (I/Os)
,stern
Give this one a try later!
Rear of a vessel
Class 1
Give this one a try later!
16 feet to less than 26 feet
Deep-Vee Hull
Give this one a try later!
Gives a smoother ride than a flat-bottomed hull in rough water but Takes
more power to move at the same speed as flat-bottomed hulls. May roll or
bank in sharp turns.
Two types of Hulls
Give this one a try later!
displacement and planing
, planing hulls are
Give this one a try later!
designed to rise up and glide on top of the water when enough power is
supplied. These boats may operate like displacement hulls when at rest or
at slow speeds but climb toward the surface of the water as they move
faster.
Cleat
Give this one a try later!
Metal fitting on which a rope can be fastened
drive shaft
Give this one a try later!
The long stem connection between the motor and the impeller
Jet drives also may power
____________ and are used commonly for vessels designed for shallow water conditions.
Jet boats can have inboard or outboard jet drives.
Give this one a try later!
