NEIEP 500 Final
#14 (505 pg. 36) - ANS - What is the minimum size wire allowed be code for wiring
100 VAC lighting circuits to elevator cars?
1 1/2 inch (525 pg.12) - ANS - What is the maximum clearance allowed between the
hoistway sill and the platform sill for passenger elevators?
100 feet (510 pg. 10) - ANS - On high rise of raceways, the wires must be supported
at least how many feet?
18 inches (525 pg 16) - ANS - You are adjusting the passenger doors for a traction
drive with generator field control. What is the maximum distance the car can be from
floor level before the doors unlock?
3 (555 pg. 26) - ANS - How many turns of safety rope must remain on the safety drum
after a rated load and rated speed test of a winding drum operated safety?
360 degrees - ANS - When bending conduit, what is the maximum number of bends in
degrees between access points?
42 inches - ANS - What is the minimum height of a barricade placed around as open
hoistway?
42 inches (525 pg. 21)f - ANS - You are installing push button boxes in a high rise
building. What is the maximum height that they can be located from the floor level to the
center of the fixture?
45 inches (515 pg. 8) - ANS - What is the minimum loop size for 1 1/2 inch traveling
cable?
7 feet (510 pg. 21) - ANS - What is the minimum overhead clearance for raceways
mounted in the machine room overhead?
All splices must be accessible after installation is complete - ANS - Which of the
following is correct about splicing wires?
door clutch (530 pg. 30) - ANS - Which of the following components is used to engage
and couple the car door to the hoistway door during opening and closing?
#14 (505 pg. 36) - ANS - What is the minimum size wire allowed be code for wiring
100 VAC lighting circuits to elevator cars?
1 1/2 inch (525 pg.12) - ANS - What is the maximum clearance allowed between the
hoistway sill and the platform sill for passenger elevators?
100 feet (510 pg. 10) - ANS - On high rise of raceways, the wires must be supported
at least how many feet?
18 inches (525 pg 16) - ANS - You are adjusting the passenger doors for a traction
drive with generator field control. What is the maximum distance the car can be from
floor level before the doors unlock?
3 (555 pg. 26) - ANS - How many turns of safety rope must remain on the safety drum
after a rated load and rated speed test of a winding drum operated safety?
360 degrees - ANS - When bending conduit, what is the maximum number of bends in
degrees between access points?
42 inches - ANS - What is the minimum height of a barricade placed around as open
hoistway?
42 inches (525 pg. 21)f - ANS - You are installing push button boxes in a high rise
building. What is the maximum height that they can be located from the floor level to the
center of the fixture?
45 inches (515 pg. 8) - ANS - What is the minimum loop size for 1 1/2 inch traveling
cable?
7 feet (510 pg. 21) - ANS - What is the minimum overhead clearance for raceways
mounted in the machine room overhead?
All splices must be accessible after installation is complete - ANS - Which of the
following is correct about splicing wires?
door clutch (530 pg. 30) - ANS - Which of the following components is used to engage
and couple the car door to the hoistway door during opening and closing?
