Stryker Trauma Exam Questions And
Answers Latest Update 2025
Alpha GT/PF Nail Diameters -
correct answer ✅9-15 mm
Alpha GT/PF Lengths -
correct answer ✅240 mm - 480 mm in 20 mm increments
What are the 5.0 Locking Screw Length Increments -
correct answer ✅25 mm - 60 mm in 2.5 increments. 60-120 in 5
mm increments
Advanced Locking Screws Sizes -
correct answer ✅30-60 in 2.5 mm increments and 60-100 in 5mm
increments
Diameter Changes of Advanced Locking Screws -
correct answer ✅bottom is 4.5, shaft is 5.3 and top is 5.7
Discuss the purpose of Advanced Locking Screws -
correct answer ✅Designed with oversized threads that engage
with the internal threads of the nail.
, Stryker Trauma Exam Questions And
Answers Latest Update 2025
Discuss how to implant an advanced locking screw -
correct answer ✅first drill both cortices with the 4.2 DB and
determine length as usual. Use the counterbore to open the near
cortex. Make sure it is centered in the pilot hole and the hole of the
nail and advance until the stop is reached. Advance the screw
through the cortex without rotating. Push until the leading tip (4.5
part) Rotate the screw counterclockise while applying gentle force.
When you hear the clicking sound it indicates the screw is in the
right position and you can rotate clockwise until it is fully seated.
what is the anteversion of the 6.5 recon screws on GT/PF -
correct answer ✅10 Degrees.
Distance of the most proximal recon screw to the proximal end of
the nail ? -
correct answer ✅GT is 31 mm and PF is 19 mm
What are the lengths of the grooves on the Antegrade Targeter? -
correct answer ✅1,10,15
explain the purpose of the k wire hole on the targeting arm
(Antegrade) -
Answers Latest Update 2025
Alpha GT/PF Nail Diameters -
correct answer ✅9-15 mm
Alpha GT/PF Lengths -
correct answer ✅240 mm - 480 mm in 20 mm increments
What are the 5.0 Locking Screw Length Increments -
correct answer ✅25 mm - 60 mm in 2.5 increments. 60-120 in 5
mm increments
Advanced Locking Screws Sizes -
correct answer ✅30-60 in 2.5 mm increments and 60-100 in 5mm
increments
Diameter Changes of Advanced Locking Screws -
correct answer ✅bottom is 4.5, shaft is 5.3 and top is 5.7
Discuss the purpose of Advanced Locking Screws -
correct answer ✅Designed with oversized threads that engage
with the internal threads of the nail.
, Stryker Trauma Exam Questions And
Answers Latest Update 2025
Discuss how to implant an advanced locking screw -
correct answer ✅first drill both cortices with the 4.2 DB and
determine length as usual. Use the counterbore to open the near
cortex. Make sure it is centered in the pilot hole and the hole of the
nail and advance until the stop is reached. Advance the screw
through the cortex without rotating. Push until the leading tip (4.5
part) Rotate the screw counterclockise while applying gentle force.
When you hear the clicking sound it indicates the screw is in the
right position and you can rotate clockwise until it is fully seated.
what is the anteversion of the 6.5 recon screws on GT/PF -
correct answer ✅10 Degrees.
Distance of the most proximal recon screw to the proximal end of
the nail ? -
correct answer ✅GT is 31 mm and PF is 19 mm
What are the lengths of the grooves on the Antegrade Targeter? -
correct answer ✅1,10,15
explain the purpose of the k wire hole on the targeting arm
(Antegrade) -
