Complete Solutions
A
R
U
LA
C
O
D
, Rod lense laparoscope - ANS dark or blurry image can occur.
- Look at lens end up to light for black spots.
- clouded image can also be from moisture in eye piece, can be dried with gauze
A
Light source - ANS 300 watt xenon lamp
preop check list - ANS - check that CO2 tank is attached to CO2 supply
R
- if using CO2 tank, open valve to make sure tank is full, spare is available and no gas leaks
- check all cables connected correct and securely
- check availability of spare equipment
- monitor insufflator settings, energy source settings, assist w/ monitor positioning and taking
U
photos
Loss of working space - ANS - check insufflator first
LA
- if pressure fine, pt may not be appropriately relaxed.
- check valve on port conncted to insufflator tubing
- check tubing along its entire path
- If low pressure but high flow, may be a leak somewhere.
- if low pressure and no flow, check insufflator to ensure power is on. check gas level in tanks
C
Monopolar energy - ANS complete circuit
low frequency from wall source to high frequency (instrument)
- tissue coagulation occurs as a result of tissue heating. protein denaturation.
- as tissue temp rises -> dessication
O
tissue heating - ANS current density squared
D
Current density - ANS the amount of current per unit area
- current (Amps)/Area (cm2)
large area of tissue contact, low current density
cutting mode - ANS heat tissue quickly
- minimal lateral thermal tissue damage but poor coagulation
- low voltage, high frequency
coagulation mode - ANS -rapid surface heating, minimal depth
- heat more widely dispersed