MILLWRIGHT APPRENTICE EXAM 1
QUESTIONS AND ANSWERS 2025
Compared to fibre core, IWRC tends to be resilient and less capable of absorbing shock loads
a. more
b. less
c. equally
d. slightly more - CORRECT ANS✔✔ b. less
What rope is considered to be a standard wire
a. Lang lay
b. right regular lay
c. left regular lay
d. performing lay - CORRECT ANS✔✔ b. right regular lay
What safety factor is used for elevators?
a. 30-1
b. 10-1
c. 20-1
d. 10-80 - CORRECT ANS✔✔ ? Google
What is the maximum capacity in Kg of a medium duty ladder?
a. 136
, b. 102
c. 99
d. 400 - CORRECT ANS✔✔ b. 102
**In Kgs Grade CSA light
90 3
medium 102 2
heavy 114 1
Extra Heavy 137 1A
Super Heavy 170 1AA
Which of the following products on fire would require a Class D extinguisher?
a. energized electrical
b. magnesium, titanium, sodium acetylene or natural gas
c. wood
d. acetylene or natural gas - CORRECT ANS✔✔ b. magnesium, titanium, sodium acetylene or natural
gas
What extinguisher class is rare and are usually only found where large quantities of a specific metal are
found?
a. D
b. C
c. A
d. B - CORRECT ANS✔✔ a, Class D
What are the common types of measurement used by Millwrights?
a. inside/outside
, b. precision and non precision
c. weight and mass
d. rough diameter - CORRECT ANS✔✔ b. precision and non precision
Which of the following best describes tool steel
a. corrosion resisitant
b. alloyed with large amounts of chromium
c. copper and zinc
d, copper and tin
e. very expensive - CORRECT ANS✔✔ e. very expensive
What is formed when perlite is heated to red heat?
a. austentite
b. martensite
c. ferrite
d. pearlite - CORRECT ANS✔✔ a. austentite
Which of the following best describes a bevel protector
a. one leg is positioned and adjustable in length, the other is cureved
b. can be used to check out/lay out various angles from 0-180 degrees
c. its a case
d. a fully lined case with dial guage - CORRECT ANS✔✔ b. can be used to check out/lay out various
angles from 0- 180 degrees
Given the tolerance zone signal 50H A, H represents?
a. basic size
QUESTIONS AND ANSWERS 2025
Compared to fibre core, IWRC tends to be resilient and less capable of absorbing shock loads
a. more
b. less
c. equally
d. slightly more - CORRECT ANS✔✔ b. less
What rope is considered to be a standard wire
a. Lang lay
b. right regular lay
c. left regular lay
d. performing lay - CORRECT ANS✔✔ b. right regular lay
What safety factor is used for elevators?
a. 30-1
b. 10-1
c. 20-1
d. 10-80 - CORRECT ANS✔✔ ? Google
What is the maximum capacity in Kg of a medium duty ladder?
a. 136
, b. 102
c. 99
d. 400 - CORRECT ANS✔✔ b. 102
**In Kgs Grade CSA light
90 3
medium 102 2
heavy 114 1
Extra Heavy 137 1A
Super Heavy 170 1AA
Which of the following products on fire would require a Class D extinguisher?
a. energized electrical
b. magnesium, titanium, sodium acetylene or natural gas
c. wood
d. acetylene or natural gas - CORRECT ANS✔✔ b. magnesium, titanium, sodium acetylene or natural
gas
What extinguisher class is rare and are usually only found where large quantities of a specific metal are
found?
a. D
b. C
c. A
d. B - CORRECT ANS✔✔ a, Class D
What are the common types of measurement used by Millwrights?
a. inside/outside
, b. precision and non precision
c. weight and mass
d. rough diameter - CORRECT ANS✔✔ b. precision and non precision
Which of the following best describes tool steel
a. corrosion resisitant
b. alloyed with large amounts of chromium
c. copper and zinc
d, copper and tin
e. very expensive - CORRECT ANS✔✔ e. very expensive
What is formed when perlite is heated to red heat?
a. austentite
b. martensite
c. ferrite
d. pearlite - CORRECT ANS✔✔ a. austentite
Which of the following best describes a bevel protector
a. one leg is positioned and adjustable in length, the other is cureved
b. can be used to check out/lay out various angles from 0-180 degrees
c. its a case
d. a fully lined case with dial guage - CORRECT ANS✔✔ b. can be used to check out/lay out various
angles from 0- 180 degrees
Given the tolerance zone signal 50H A, H represents?
a. basic size
