Carpentry 1 Module 6 Questions and
Answers | Latest Version | 2024/2025 |
Correct & Verified
What is the purpose of a dowel joint in carpentry?
✔✔ A dowel joint is used to join two pieces of wood by inserting dowels into pre-drilled holes to
create a strong, hidden connection.
Why is it important to wear hearing protection when using power tools?
✔✔ Hearing protection helps prevent hearing loss from the loud noise generated by power tools
during extended use.
What is the function of a tack cloth in woodworking?
✔✔ A tack cloth is used to wipe away dust and debris from wood surfaces before finishing or
painting.
What should you do if a power tool begins to malfunction?
✔✔ Immediately stop using the tool, unplug it, and report it to a supervisor or technician for
inspection and repair.
1
, What is the purpose of a stud finder in carpentry?
✔✔ A stud finder is used to locate the wooden studs behind drywall to help with hanging
fixtures or for framing purposes.
How can you avoid splintering when cutting wood?
✔✔ To avoid splintering, use a fine-toothed blade and cut with the finished side facing down or
apply painter’s tape along the cut line.
What type of finish is best for wood exposed to the elements?
✔✔ Exterior wood finishes, such as polyurethane or marine varnish, are designed to protect
wood from moisture, UV rays, and weathering.
What is the purpose of a level in carpentry?
✔✔ A level is used to check if a surface or object is horizontal or vertical.
What is a miter joint used for in woodworking?
✔✔ A miter joint is used to join two pieces of wood at an angle, typically 45 degrees, to create a
neat corner.
2
Answers | Latest Version | 2024/2025 |
Correct & Verified
What is the purpose of a dowel joint in carpentry?
✔✔ A dowel joint is used to join two pieces of wood by inserting dowels into pre-drilled holes to
create a strong, hidden connection.
Why is it important to wear hearing protection when using power tools?
✔✔ Hearing protection helps prevent hearing loss from the loud noise generated by power tools
during extended use.
What is the function of a tack cloth in woodworking?
✔✔ A tack cloth is used to wipe away dust and debris from wood surfaces before finishing or
painting.
What should you do if a power tool begins to malfunction?
✔✔ Immediately stop using the tool, unplug it, and report it to a supervisor or technician for
inspection and repair.
1
, What is the purpose of a stud finder in carpentry?
✔✔ A stud finder is used to locate the wooden studs behind drywall to help with hanging
fixtures or for framing purposes.
How can you avoid splintering when cutting wood?
✔✔ To avoid splintering, use a fine-toothed blade and cut with the finished side facing down or
apply painter’s tape along the cut line.
What type of finish is best for wood exposed to the elements?
✔✔ Exterior wood finishes, such as polyurethane or marine varnish, are designed to protect
wood from moisture, UV rays, and weathering.
What is the purpose of a level in carpentry?
✔✔ A level is used to check if a surface or object is horizontal or vertical.
What is a miter joint used for in woodworking?
✔✔ A miter joint is used to join two pieces of wood at an angle, typically 45 degrees, to create a
neat corner.
2
