Questions and Answers 100% Solved
1. I do a ____ after replacing a spout to a Healy 900 nozzle - ✔✔shut off
test
2. In a balance hose the gasoline flows in - ✔✔Inner hose
3. After the installation of the vapor piping and before back filling, PEI 300
suggests some methods to document piping layout, except? - ✔✔Drawing
with a pen, pipe layout on the cover of the tank manual.
4. During VO-1000 you don't - ✔✔Work without eye protection
5. An Overfill Alarm device needs to be located - ✔✔Where it can be heard
or seen by the delivery location.
6. When in a GDF you can avoid the installation of UDC? - ✔✔No
exceptions of any GDF.
7. What is considered an Underground Storage Tank? - ✔✔Tank and
pipping only
8. Gasoline vapors are 3/4 times _____ than air - ✔✔Heavier
1
©JOSHCLAY 2024/2025. YEAR PUBLISHED 2024.
, 9. Compounds with a high vapor pressure such as gasoline will evaporate
readily and will typically - ✔✔Have a low Flashpoint.
10. The ____ is the valve that controls pressure and vacuum on the tank. -
✔✔P/V Valve
11. The vapor piping must be all, but not - ✔✔Compatible with underground
environment.
12. The Shear Valve is installed ____ - ✔✔At the base of the dispenser.
13. What is the max length of a Healy Hose Phase 2? - ✔✔20 Feet.
14 A ___ is a component of the hanging hardware that separates when it's
applied a force? - ✔✔Breakaway.
15. UL listed means all except : - ✔✔Worldwide Approved.
16. After a drive off, a technician should not - ✔✔Ask attendant to fill out a
drive off accident report.
17. The executive order 201-A says that the reconnection of the breakaway
needs to be - ✔✔Logged in the maintenance GDF.
18. What is not a secondary containment testing method? - ✔✔Statistical
Inventory Reconciliation.
2
©JOSHCLAY 2024/2025. YEAR PUBLISHED 2024.