LOCAL 94 SCHOOL - 475 TERMS TO KNOW
FOR THE RMO WRITTEN EXAM | 400
QUESTIONS | WITH COMPLETE SOLUTIONS!!
1 of 400
Give this one a try later!
, Don't know?
2 of 400
Term
What do compound gauges measure?
Give this one a try later!
Positive and negative It's purpose is to cycle the
pressure. compressor on and off.
It is used to add and remove oil. It is a gas tight fitting.
Don't know?
3 of 400
Term
What are the advantages of an automatic expansion valve?
Give this one a try later!
It is used to supply oil to the
It is not ideal and frankly too high.
bearings at start up.
, It maintains a constant
They are sized according to evaporator pressure, it's a
refrigerant tonnage and a pressure simple design and little could
drop through the valve that is go wrong and an excessive
acceptable. charge will have no effect.
Don't know?
4 of 400
Term
What is a Zimmerli gauge used to measure?
Give this one a try later!
It is used to supply oil to the
As the suction pressure increases.
bearings at start up.
Turbines use sleeve bearings. It is used to measure vacuum.
Don't know?
5 of 400
Term
How many wires are in a single phase 208 volt circuit?
Give this one a try later!
, A higher temperature supply. By keeping the suction valves open.
With seals made of metal and
3 total - 2 Hot and 1 ground.
carbon.
Don't know?
6 of 400
Term
What system uses chilled water and brines to cool building spaces?
Give this one a try later!
A strong wind. Air and water.
It creates positive pressure to
Indirect systems.
eliminate shaft leakage.
Don't know?
FOR THE RMO WRITTEN EXAM | 400
QUESTIONS | WITH COMPLETE SOLUTIONS!!
1 of 400
Give this one a try later!
, Don't know?
2 of 400
Term
What do compound gauges measure?
Give this one a try later!
Positive and negative It's purpose is to cycle the
pressure. compressor on and off.
It is used to add and remove oil. It is a gas tight fitting.
Don't know?
3 of 400
Term
What are the advantages of an automatic expansion valve?
Give this one a try later!
It is used to supply oil to the
It is not ideal and frankly too high.
bearings at start up.
, It maintains a constant
They are sized according to evaporator pressure, it's a
refrigerant tonnage and a pressure simple design and little could
drop through the valve that is go wrong and an excessive
acceptable. charge will have no effect.
Don't know?
4 of 400
Term
What is a Zimmerli gauge used to measure?
Give this one a try later!
It is used to supply oil to the
As the suction pressure increases.
bearings at start up.
Turbines use sleeve bearings. It is used to measure vacuum.
Don't know?
5 of 400
Term
How many wires are in a single phase 208 volt circuit?
Give this one a try later!
, A higher temperature supply. By keeping the suction valves open.
With seals made of metal and
3 total - 2 Hot and 1 ground.
carbon.
Don't know?
6 of 400
Term
What system uses chilled water and brines to cool building spaces?
Give this one a try later!
A strong wind. Air and water.
It creates positive pressure to
Indirect systems.
eliminate shaft leakage.
Don't know?
