What NSTM deals with propulsion and NSTM 231
SSTG Turbines?
Whats type of rotary pump is frequently Simple gear pimp
used as a lubricanting pump on pumpe
and other aux equipment?
What is the normal length of a tapered 3"
plug?
What is installed on a non-condensing Combination exhaust relief valve 2-3 psi above exhaust line pressure
turbone to protect turbine casing from
excessive pressure?
On an SSTG, what protects turbine casing Back pressure trip
from excessive pressure?
When starting an SSTG, what is a minimum 60 degrees
lube oil temp?
What are the four sections of a PQS? Fundamentals, systems, watchstations, qual card
What is the number for a PMS feedback 4790/7B
report?
When should oil coolers be put into When temp of lube oil leaving cooler is 100 degrees
operation on aux machinery?
DFT is designed to operate at what 15 psi and 240-250 degrees
pressure and temp?
What is installed on a centrifugal pump to Wearing rings
eliminate renewing of an entire propellor
and pump casing due to rapid wear?
The federal water pollution control act 1970
was amended in what year?
What is the NSTM for compressed air 551
systems?
What is the max allowable pressure drop 3%
across a fuel oil duplex strainer when
online?
What is the NSTM for general reduction 241
gear?
What is the NSTM for forced draft 554
blowers?
What is the required amount of sodium 10lbs per 1,000 gallons of feed water
nitrate used for a sodium nitrate wet lay
up?
What is the NSTM for insulation and 635
lagging?
What is QA chapter 11? QA forms and instructions
What is QA chapter 12? Submarine preservation
What is QA chapter 13? Wire removal and replacement
What is QA chapter 10? Quality assurance records
What is QA chapter 9? Audits, surveillance, evaluations and assesments
What is QA chapter 3? PQS and training
What is QA chapter 2? Quality maintenance process
, What is QA chapter 4? Welder, brazer, and NDT qualifications
What is QA chapter 5? In process control
When is the current ships maintenance Monthly
project verified and updated?
PMS schedules are categorized in what Cycle, quarterly, weekly
manner?
Multi stage
Main feed pump is classified as what type
High speed
of pump?
Turbine driven
How long must the engine room/fire 2 years
room operating log be kept for?
Main feed pumps are fitted with what two Speed limiting
types of governors? Constant speed
the number of revolutions to major speed 3
change is entered in what column?
Entries for astern pitch are preceded by B
what level?
What is the max allowable super heater 1020 degrees
outlet temp during transition periods of
15mins - 1 hour on a 1200 psig D type
boiler?
What is the first action taken, when you Shift boiler feed water control to remote/manual
are experiencing difficulty in maintaining
boiler water level on an automated ship?
In the engineering bell book, what does I Ahead standard speed
mean?
In the engineering bell book, what does Ahead flank speed
III mean?
In the engineering bell book, what does B Back 1/3 speed
1/3 mean?
In the engineering bell book, what does Z Stop
mean?
In the engineering bell book, what does Back full speed
BF mean?
In the engineering bell book, what does Back emergency speed
BEM mean?
In the engineering bell book, what does II Ahead full speed
mean?
When order received is recorded as RPM 2
in what column?
What QA for is used for testing and QA form 17
inspection?
Boiler high water alarm is set to what +7 inches
parameter
During a white smoke casualty to a boiler, Fuel oil header pressure
what must never be adjusted?
What temp is lube oil maintained on an 120-130 degrees
operating main engine?
SSTG Turbines?
Whats type of rotary pump is frequently Simple gear pimp
used as a lubricanting pump on pumpe
and other aux equipment?
What is the normal length of a tapered 3"
plug?
What is installed on a non-condensing Combination exhaust relief valve 2-3 psi above exhaust line pressure
turbone to protect turbine casing from
excessive pressure?
On an SSTG, what protects turbine casing Back pressure trip
from excessive pressure?
When starting an SSTG, what is a minimum 60 degrees
lube oil temp?
What are the four sections of a PQS? Fundamentals, systems, watchstations, qual card
What is the number for a PMS feedback 4790/7B
report?
When should oil coolers be put into When temp of lube oil leaving cooler is 100 degrees
operation on aux machinery?
DFT is designed to operate at what 15 psi and 240-250 degrees
pressure and temp?
What is installed on a centrifugal pump to Wearing rings
eliminate renewing of an entire propellor
and pump casing due to rapid wear?
The federal water pollution control act 1970
was amended in what year?
What is the NSTM for compressed air 551
systems?
What is the max allowable pressure drop 3%
across a fuel oil duplex strainer when
online?
What is the NSTM for general reduction 241
gear?
What is the NSTM for forced draft 554
blowers?
What is the required amount of sodium 10lbs per 1,000 gallons of feed water
nitrate used for a sodium nitrate wet lay
up?
What is the NSTM for insulation and 635
lagging?
What is QA chapter 11? QA forms and instructions
What is QA chapter 12? Submarine preservation
What is QA chapter 13? Wire removal and replacement
What is QA chapter 10? Quality assurance records
What is QA chapter 9? Audits, surveillance, evaluations and assesments
What is QA chapter 3? PQS and training
What is QA chapter 2? Quality maintenance process
, What is QA chapter 4? Welder, brazer, and NDT qualifications
What is QA chapter 5? In process control
When is the current ships maintenance Monthly
project verified and updated?
PMS schedules are categorized in what Cycle, quarterly, weekly
manner?
Multi stage
Main feed pump is classified as what type
High speed
of pump?
Turbine driven
How long must the engine room/fire 2 years
room operating log be kept for?
Main feed pumps are fitted with what two Speed limiting
types of governors? Constant speed
the number of revolutions to major speed 3
change is entered in what column?
Entries for astern pitch are preceded by B
what level?
What is the max allowable super heater 1020 degrees
outlet temp during transition periods of
15mins - 1 hour on a 1200 psig D type
boiler?
What is the first action taken, when you Shift boiler feed water control to remote/manual
are experiencing difficulty in maintaining
boiler water level on an automated ship?
In the engineering bell book, what does I Ahead standard speed
mean?
In the engineering bell book, what does Ahead flank speed
III mean?
In the engineering bell book, what does B Back 1/3 speed
1/3 mean?
In the engineering bell book, what does Z Stop
mean?
In the engineering bell book, what does Back full speed
BF mean?
In the engineering bell book, what does Back emergency speed
BEM mean?
In the engineering bell book, what does II Ahead full speed
mean?
When order received is recorded as RPM 2
in what column?
What QA for is used for testing and QA form 17
inspection?
Boiler high water alarm is set to what +7 inches
parameter
During a white smoke casualty to a boiler, Fuel oil header pressure
what must never be adjusted?
What temp is lube oil maintained on an 120-130 degrees
operating main engine?
