2W151 Set B Vol 2 Questions and
Answers 100% Pass
What is the main purpose of explosive ordnance during combat operations?
✔✔ To neutralize targets and achieve mission objectives effectively.
How is a guided bomb unit (GBU) directed to its target?
✔✔ Through a combination of GPS, laser guidance, or inertial navigation systems.
Why are time fuzes used in certain munitions?
✔✔ To control when the explosive device will detonate after deployment.
What is the function of a bomb suspension lug?
✔✔ To secure the bomb to the aircraft's bomb rack during transport and release.
How is a munitions delivery system calibrated?
✔✔ By using precision measurement equipment and aligning it according to technical
specifications.
1
,Why is it important to inspect arming solenoids in weapons systems?
✔✔ To ensure they function correctly and do not unintentionally arm a weapon.
What is the role of an aircraft weapons load crew?
✔✔ To install, inspect, and verify the functionality of munitions on an aircraft.
How does an air-to-ground missile differ from an air-to-air missile?
✔✔ Air-to-ground missiles target surface objectives, while air-to-air missiles target other
aircraft.
Why must munitions storage facilities have proper ventilation?
✔✔ To reduce the buildup of hazardous fumes and ensure safe storage conditions.
What is a thermal battery, and where is it used in munitions?
✔✔ A thermal battery provides power for missile guidance systems and is activated during
launch.
How are munitions transported safely across a base?
2
,✔✔ By using approved vehicles and following strict transportation protocols.
Why are weapon system components tested before deployment?
✔✔ To confirm that all systems are operational and ready for use in the field.
What is the purpose of a pylon adapter in weapons systems?
✔✔ To attach weapons securely to an aircraft's external hardpoints.
How is a munitions reliability test conducted?
✔✔ By firing sample munitions under controlled conditions and analyzing their performance.
What is the primary use of chaff and flare systems on aircraft?
✔✔ To counter radar and infrared-guided threats by creating decoys.
Why are explosive materials classified into different hazard categories?
✔✔ To ensure proper handling, storage, and transportation based on their risk level.
How are missile launch rails maintained?
3
, ✔✔ By cleaning, lubricating, and inspecting them for damage or wear regularly.
What is the significance of a bomb's arm-delay setting?
✔✔ It controls the time between deployment and when the bomb becomes armed.
Why are safety protocols critical during munitions assembly?
✔✔ To prevent accidents and ensure all components are correctly installed.
How does a precision-guided munition achieve accuracy?
✔✔ By using advanced targeting systems such as lasers, GPS, or radar.
What is the purpose of an initiator in explosive systems?
✔✔ To trigger the detonation sequence of the main explosive charge.
How are defective munitions components identified?
✔✔ Through visual inspections, testing, and comparing performance to technical standards.
What is the primary reason for labeling and tagging munitions?
4
Answers 100% Pass
What is the main purpose of explosive ordnance during combat operations?
✔✔ To neutralize targets and achieve mission objectives effectively.
How is a guided bomb unit (GBU) directed to its target?
✔✔ Through a combination of GPS, laser guidance, or inertial navigation systems.
Why are time fuzes used in certain munitions?
✔✔ To control when the explosive device will detonate after deployment.
What is the function of a bomb suspension lug?
✔✔ To secure the bomb to the aircraft's bomb rack during transport and release.
How is a munitions delivery system calibrated?
✔✔ By using precision measurement equipment and aligning it according to technical
specifications.
1
,Why is it important to inspect arming solenoids in weapons systems?
✔✔ To ensure they function correctly and do not unintentionally arm a weapon.
What is the role of an aircraft weapons load crew?
✔✔ To install, inspect, and verify the functionality of munitions on an aircraft.
How does an air-to-ground missile differ from an air-to-air missile?
✔✔ Air-to-ground missiles target surface objectives, while air-to-air missiles target other
aircraft.
Why must munitions storage facilities have proper ventilation?
✔✔ To reduce the buildup of hazardous fumes and ensure safe storage conditions.
What is a thermal battery, and where is it used in munitions?
✔✔ A thermal battery provides power for missile guidance systems and is activated during
launch.
How are munitions transported safely across a base?
2
,✔✔ By using approved vehicles and following strict transportation protocols.
Why are weapon system components tested before deployment?
✔✔ To confirm that all systems are operational and ready for use in the field.
What is the purpose of a pylon adapter in weapons systems?
✔✔ To attach weapons securely to an aircraft's external hardpoints.
How is a munitions reliability test conducted?
✔✔ By firing sample munitions under controlled conditions and analyzing their performance.
What is the primary use of chaff and flare systems on aircraft?
✔✔ To counter radar and infrared-guided threats by creating decoys.
Why are explosive materials classified into different hazard categories?
✔✔ To ensure proper handling, storage, and transportation based on their risk level.
How are missile launch rails maintained?
3
, ✔✔ By cleaning, lubricating, and inspecting them for damage or wear regularly.
What is the significance of a bomb's arm-delay setting?
✔✔ It controls the time between deployment and when the bomb becomes armed.
Why are safety protocols critical during munitions assembly?
✔✔ To prevent accidents and ensure all components are correctly installed.
How does a precision-guided munition achieve accuracy?
✔✔ By using advanced targeting systems such as lasers, GPS, or radar.
What is the purpose of an initiator in explosive systems?
✔✔ To trigger the detonation sequence of the main explosive charge.
How are defective munitions components identified?
✔✔ Through visual inspections, testing, and comparing performance to technical standards.
What is the primary reason for labeling and tagging munitions?
4
