11/12/24, 7:53 PM 2024 newest| Level 1-FDOT Asphalt Paving |2024-2025 UPDATE|COMPREHENSIVE QUESTIONS AND VERIFIED SOLUTI…
2024 newest| Level 1-FDOT Asphalt Paving
|2024-2025 UPDATE|COMPREHENSIVE
QUESTIONS AND VERIFIED
SOLUTIONS/CORRECT ANSWERS|GET 100%
ACCURATE!!
Practice questions for this set
Learn 1 /7 Study with Learn
Downstation
Give this one a try later!
Using what chart to calculate start
1 Straight Edge is the 2 and end readings to find how
many gallons were used
S to N 4 Degree of accuracy for levels
Don't know?
Terms in this set (72)
https://quizlet.com/970384943/2024-newest-level-1-fdot-asphalt-paving-2024-2025-updatecomprehensive-questions-and-verified-solutionscorrect… 1/7
, 11/12/24, 7:53 PM 2024 newest| Level 1-FDOT Asphalt Paving |2024-2025 UPDATE|COMPREHENSIVE QUESTIONS AND VERIFIED SOLUTI…
S to N Downstation
W to E Downstation
Stationing Starts at 0+00
Stationing Measurement 1+00 is 100 feet
Measurement of Pavement smoothness with a 15
Straight Edge is the
foot 4.573 m rolling straightedge
Straight Edge is used to identify problems
Are random numbers generated usually by a VT for
Random sampling
cores to be extracted from the roadway
How often should you Calibrate at the start of each working period
calibrate a Straight edge
Using the manual straight Locate a flat area with the manual straightedge and
edge you find what kind place the rolling straightedge next to the manual
of spot to place the straightedge and the gauge should read 0
rolling straightedge?
The outside wheels to measure the low and the
The 3/16 and the 3/8 center to measure the high. Gauge should read 3/16
shims go under which on the 3/16 shim and vice versa for the 3/8 shims.
wheels during calibration Make sure the center wheel moves up and down
freely.
Rolling Straightedge
Manual Straightedge
Calibration materials for
Manual Measurement (ruler)
Straightedge
x4 3/16 shims 5mm thick
x4 3/8 shims 10mm thick
When to perform final After an entire lane has been paved
straightedge
When to perform final Pavement should be an ambient temperature
straightedge
You cannot use the calibrated
straightedge until it has
been properly
https://quizlet.com/970384943/2024-newest-level-1-fdot-asphalt-paving-2024-2025-updatecomprehensive-questions-and-verified-solutionscorrect… 2/7
2024 newest| Level 1-FDOT Asphalt Paving
|2024-2025 UPDATE|COMPREHENSIVE
QUESTIONS AND VERIFIED
SOLUTIONS/CORRECT ANSWERS|GET 100%
ACCURATE!!
Practice questions for this set
Learn 1 /7 Study with Learn
Downstation
Give this one a try later!
Using what chart to calculate start
1 Straight Edge is the 2 and end readings to find how
many gallons were used
S to N 4 Degree of accuracy for levels
Don't know?
Terms in this set (72)
https://quizlet.com/970384943/2024-newest-level-1-fdot-asphalt-paving-2024-2025-updatecomprehensive-questions-and-verified-solutionscorrect… 1/7
, 11/12/24, 7:53 PM 2024 newest| Level 1-FDOT Asphalt Paving |2024-2025 UPDATE|COMPREHENSIVE QUESTIONS AND VERIFIED SOLUTI…
S to N Downstation
W to E Downstation
Stationing Starts at 0+00
Stationing Measurement 1+00 is 100 feet
Measurement of Pavement smoothness with a 15
Straight Edge is the
foot 4.573 m rolling straightedge
Straight Edge is used to identify problems
Are random numbers generated usually by a VT for
Random sampling
cores to be extracted from the roadway
How often should you Calibrate at the start of each working period
calibrate a Straight edge
Using the manual straight Locate a flat area with the manual straightedge and
edge you find what kind place the rolling straightedge next to the manual
of spot to place the straightedge and the gauge should read 0
rolling straightedge?
The outside wheels to measure the low and the
The 3/16 and the 3/8 center to measure the high. Gauge should read 3/16
shims go under which on the 3/16 shim and vice versa for the 3/8 shims.
wheels during calibration Make sure the center wheel moves up and down
freely.
Rolling Straightedge
Manual Straightedge
Calibration materials for
Manual Measurement (ruler)
Straightedge
x4 3/16 shims 5mm thick
x4 3/8 shims 10mm thick
When to perform final After an entire lane has been paved
straightedge
When to perform final Pavement should be an ambient temperature
straightedge
You cannot use the calibrated
straightedge until it has
been properly
https://quizlet.com/970384943/2024-newest-level-1-fdot-asphalt-paving-2024-2025-updatecomprehensive-questions-and-verified-solutionscorrect… 2/7
