11/7/24, 8:43 PM 2024 Newest|CNC Mill operator test|2024-2025 UPDATE|COMPREHENSIVE FREQUENTLY MOST TESTED QUESTIONS A…
2024 Newest|CNC Mill operator test|2024-2025
UPDATE|COMPREHENSIVE FREQUENTLY MOST
TESTED QUESTIONS AND VERIFIED
ANSWERS|GET IT 100% ACCURATE!!
Practice questions for this set
Learn 1 /7 Study with Learn
offset
Give this one a try later!
The area of the control keypad
An offset used on the machining
that allows the operator to show
center that accounts for variations
different information, such as 2
in tool length along the Z-
offsets, machine settings, and the
axis.
current program.
3 Page up 4 LIST PROG
Don't know?
Terms in this set (33)
https://quizlet.com/968311301/2024-newestcnc-mill-operator-test2024-2025-updatecomprehensive-frequently-most-tested-questions-and-verified-… 1/5
, 11/7/24, 8:43 PM 2024 Newest|CNC Mill operator test|2024-2025 UPDATE|COMPREHENSIVE FREQUENTLY MOST TESTED QUESTIONS A…
The area of the control offset
keypad that allows the
operator to show
different information,
such as offsets, machine
settings, and the current
program.
The area of the control Alpha keys
keypad that allows an
operator to enter letters
and special characters
into the control.
A code used to signal an M codes
action from a
miscellaneous group of
commands.
An offset used on the Tool offset
machining center that
accounts for variations in
tool length along the Z-
axis.
In zero return mode, the Home 28
key that returns and
initializes all axes to
machine zero or Home.
The rate that the cutting Feed rate
tool or work piece moves
at the point of contact.
The control button used Feed hold
to pause a program.
The control button used to begin a program or
CYCLE START continue a program that has been
previously stopped.
FEED HOLD The control button used to pause a program.
https://quizlet.com/968311301/2024-newestcnc-mill-operator-test2024-2025-updatecomprehensive-frequently-most-tested-questions-and-verified-… 2/5
2024 Newest|CNC Mill operator test|2024-2025
UPDATE|COMPREHENSIVE FREQUENTLY MOST
TESTED QUESTIONS AND VERIFIED
ANSWERS|GET IT 100% ACCURATE!!
Practice questions for this set
Learn 1 /7 Study with Learn
offset
Give this one a try later!
The area of the control keypad
An offset used on the machining
that allows the operator to show
center that accounts for variations
different information, such as 2
in tool length along the Z-
offsets, machine settings, and the
axis.
current program.
3 Page up 4 LIST PROG
Don't know?
Terms in this set (33)
https://quizlet.com/968311301/2024-newestcnc-mill-operator-test2024-2025-updatecomprehensive-frequently-most-tested-questions-and-verified-… 1/5
, 11/7/24, 8:43 PM 2024 Newest|CNC Mill operator test|2024-2025 UPDATE|COMPREHENSIVE FREQUENTLY MOST TESTED QUESTIONS A…
The area of the control offset
keypad that allows the
operator to show
different information,
such as offsets, machine
settings, and the current
program.
The area of the control Alpha keys
keypad that allows an
operator to enter letters
and special characters
into the control.
A code used to signal an M codes
action from a
miscellaneous group of
commands.
An offset used on the Tool offset
machining center that
accounts for variations in
tool length along the Z-
axis.
In zero return mode, the Home 28
key that returns and
initializes all axes to
machine zero or Home.
The rate that the cutting Feed rate
tool or work piece moves
at the point of contact.
The control button used Feed hold
to pause a program.
The control button used to begin a program or
CYCLE START continue a program that has been
previously stopped.
FEED HOLD The control button used to pause a program.
https://quizlet.com/968311301/2024-newestcnc-mill-operator-test2024-2025-updatecomprehensive-frequently-most-tested-questions-and-verified-… 2/5
