FIRE PUMP EXAM \ CAL.FIRE WEEKLY
ACTUAL EXAM WITH QUESTIONS AND
DETAILED ANSWERS |2024 UPDATES
1. The purpose of inspection shall be to verify that the pump
assembly - correct answer > Appears to be condition and is
free from physical damage
2.The 5 pertinent visual observations specified in the NFPA 25
checklist that shall be performed weekly are - correct answer >
1 Pump house condition 2 pump system conditions 3 electrical
system conditions Diesel engine system conditions 5 steam
system conditions
3.Part of the check of the pump house conditions is that : -
correct answer > ventilating louvers are free to operate
4. During the weekly inspection the pump suction discharge
and bypass valves should be observed to be : - correct answer >
OB fully open
,05. During the weekly inspection , the suction reservoir should
be observed to be : - correct answer > A full
6. As observed during the weekly inspections wet pit suction
screens should be - correct answer > Unobstructed and in
place
7. During the weekly inspection of the pump assembly the
controller pilot light should be - correct answer > Illuminated
(power on)
8. During the weekly inspection of the pump assembly the
transfer switch normal pilot light should be - correct answer >
Illuminated (power on)
9 During the weekly inspection of the pump assembly the
isolating switch should be observed to be - correct answer >
Closed
10 During the weekly inspection of the pump assembly the
reverse phase alarm pilot light should be observed to be -
correct answer > Off
, 11. During the weekly inspection of the pump assembly the
normal phase rotation pilot light should be observed to be -
correct answer > On
12, during the weekly inspection of the pump assembly the oil
level in the vertical motor sight glass should be observed to be -
correct answer > Normal
13.During the weekly inspection of the pump assembly the fuel
tank should be observed to be - correct answer > Two-thirds
full
14.during the weekly inspection of the pump assembly the
controller selector switch should be in ___________ position -
correct answer > Auto
15. During the weekly inspection of the pump assembly all
alarm pilot lights should be - correct answer > Off
16.During the weekly inspection of the pump assembly the
engine running________ meter is reading - correct answer >
Time
ACTUAL EXAM WITH QUESTIONS AND
DETAILED ANSWERS |2024 UPDATES
1. The purpose of inspection shall be to verify that the pump
assembly - correct answer > Appears to be condition and is
free from physical damage
2.The 5 pertinent visual observations specified in the NFPA 25
checklist that shall be performed weekly are - correct answer >
1 Pump house condition 2 pump system conditions 3 electrical
system conditions Diesel engine system conditions 5 steam
system conditions
3.Part of the check of the pump house conditions is that : -
correct answer > ventilating louvers are free to operate
4. During the weekly inspection the pump suction discharge
and bypass valves should be observed to be : - correct answer >
OB fully open
,05. During the weekly inspection , the suction reservoir should
be observed to be : - correct answer > A full
6. As observed during the weekly inspections wet pit suction
screens should be - correct answer > Unobstructed and in
place
7. During the weekly inspection of the pump assembly the
controller pilot light should be - correct answer > Illuminated
(power on)
8. During the weekly inspection of the pump assembly the
transfer switch normal pilot light should be - correct answer >
Illuminated (power on)
9 During the weekly inspection of the pump assembly the
isolating switch should be observed to be - correct answer >
Closed
10 During the weekly inspection of the pump assembly the
reverse phase alarm pilot light should be observed to be -
correct answer > Off
, 11. During the weekly inspection of the pump assembly the
normal phase rotation pilot light should be observed to be -
correct answer > On
12, during the weekly inspection of the pump assembly the oil
level in the vertical motor sight glass should be observed to be -
correct answer > Normal
13.During the weekly inspection of the pump assembly the fuel
tank should be observed to be - correct answer > Two-thirds
full
14.during the weekly inspection of the pump assembly the
controller selector switch should be in ___________ position -
correct answer > Auto
15. During the weekly inspection of the pump assembly all
alarm pilot lights should be - correct answer > Off
16.During the weekly inspection of the pump assembly the
engine running________ meter is reading - correct answer >
Time
