MSSC - QUALITY CERTIFICATION EXAM
2024/2025
Which is NOT one of the steps used in the glass box method? -
Answer✔✔rotate object in glass box
The three standard views of an object are ______. - Answer✔✔top,
front, right side
What is the order of precedence of lines in a drawing? -
Answer✔✔object, hidden, center
What type of feature is parallel to the surface being dimensioned? -
Answer✔✔dimension line
A ______ dimension is described in inches per foot. - Answer✔✔shaft
taper
To establish on a drawing that 1/4 inch equals 1 inch, the designer would
write ______. - Answer✔✔1/4 = 1
Section lines on a blueprint include _______. - Answer✔✔a surface that
has been cut
, In a threaded fastener assembly what is designed to protect the threads? -
Answer✔✔shank
The minor diameter of a screw thread is measured at the ______. -
Answer✔✔root of screw thread
The minor diameter of a threaded fastener is ______. - Answer✔✔the
major diameter minus the thread height
How do you determine the grade of a bolt? - Answer✔✔number of lines
on the head +2 indicates the grade
A screw with National fine thread is represented on a drawing with what
designation? - Answer✔✔NF
Metals treated by ______ processes become soft. - Answer✔✔annealing
A running fit is also called a(n) ______. - Answer✔✔sliding fit
The term ______ refers to a physical portion of a part. -
Answer✔✔feature
A(n) _______ is a theoretically perfect line, point or pane that is located
by a similar feature or part. - Answer✔✔datum
2024/2025
Which is NOT one of the steps used in the glass box method? -
Answer✔✔rotate object in glass box
The three standard views of an object are ______. - Answer✔✔top,
front, right side
What is the order of precedence of lines in a drawing? -
Answer✔✔object, hidden, center
What type of feature is parallel to the surface being dimensioned? -
Answer✔✔dimension line
A ______ dimension is described in inches per foot. - Answer✔✔shaft
taper
To establish on a drawing that 1/4 inch equals 1 inch, the designer would
write ______. - Answer✔✔1/4 = 1
Section lines on a blueprint include _______. - Answer✔✔a surface that
has been cut
, In a threaded fastener assembly what is designed to protect the threads? -
Answer✔✔shank
The minor diameter of a screw thread is measured at the ______. -
Answer✔✔root of screw thread
The minor diameter of a threaded fastener is ______. - Answer✔✔the
major diameter minus the thread height
How do you determine the grade of a bolt? - Answer✔✔number of lines
on the head +2 indicates the grade
A screw with National fine thread is represented on a drawing with what
designation? - Answer✔✔NF
Metals treated by ______ processes become soft. - Answer✔✔annealing
A running fit is also called a(n) ______. - Answer✔✔sliding fit
The term ______ refers to a physical portion of a part. -
Answer✔✔feature
A(n) _______ is a theoretically perfect line, point or pane that is located
by a similar feature or part. - Answer✔✔datum
