CUSP - T&D Questions & Answers 2024
CUSP - T&D Questions & Answers 2024 As per CAN/ULC S801, on an electrical distribution overhead utility line circuit, verification of voltage absence can be achieved by: - answer-Using an approved voltage detector. Isolation and tagging (no locks) is acceptable on an overhead distribution circuit under some of the following conditions, EXCEPT for: - answer-The isolation can be operated from the ground directly at the base of a structure. Isolation and tagging (no locks) is acceptable for an overhead distribution circuit under some of the following conditions: - answer-1. The isolation point is a physical and visual like a line cut or riser removed. 2. The isolation point can only be operated by the operating authority or qualified worker. 3. The isolation point is protected from unauthorized access such as vertical height spacing. Consider that a circuit has been isolated, tagged and grounded. workers returning the next day must: - answer-Visually check grounds to verify they are in good order, secure and test for voltage. For lockout purposes, energy isolating devices shall be labelled or marked using a standardized nomenclature and format to indicate their function. Identification shall include: - answer-The equipment type, energy type, and magnitude.
Escuela, estudio y materia
- Institución
- CUSP - Certified Utility Safety Professional
- Grado
- CUSP - Certified Utility Safety Professional
Información del documento
- Subido en
- 28 de octubre de 2024
- Número de páginas
- 16
- Escrito en
- 2024/2025
- Tipo
- Examen
- Contiene
- Preguntas y respuestas
Temas
-
cusp td questions answers 2024