Certified Playground Safety Inspector CPSI Sample Exam Questions| Answered 100% Correctly| Latest

Certified Playground Safety Inspector CPSI Sample Exam Questions| Answered 100% Correctly| Latest To be compliant with ASTM 1487, a designer or manufacturer of playground equipment should provide buyers with a parts list for the playground 2. The fish or wedge probe is used to determine whether or not a hazard exists on a partially bounded opening 3. Which of the following is correct regarding the impact-attenuation of surfacing material Critical height must equal or exceed fall height 4. When evaluating the structural integrity of a support structure for a swing that appears to be failing, a CPSI should hire a licensed professional engineer to certify the integrity of the equipment 5. Manufacturers of playground equipment must: provide the manufacturer's identification of the equipment 6. The majority of injuries associated with playground equipment result from falls to the surface on which the equipment was located 7. An opening may present a common crush or shear hazard only if it grabs the 5/8" (16mm) dowel 8. The criteria for unitary surface materials includes meeting requirements of ASTM F1292 and F1487 9. Regarding playground safety signage, which of the following is correct Signage may not prevent accidents but may reduce liability 10. Which of the following factors is MOST important when determining the frequency of inspections of surfacing Type of surfacing and amount of use