JACKLINE
Roofing Construction & Estimating Practice Questions With 100% SURE ANSWERS
Terms in this set (42)
Typically ______ nails are required to install a 4
three tab asphalt shingle.
When installing a BUR it ypically takes ________ 3
gallons of asphalt coating to cover 100 sq. ft of
roof
Type _______ asphalt is the most commonly III
used.
_______________ is the part of the shingle not covered Exposure
by the next course of shingle
The maximum temperature you can heat a Type 475 F
III asphalt is _________ _.
The underlayment for asphalt shingles must have 4 inches
an end lap of
Roofing
_____________ pounds Construction
of nails per square are & Estimating
2.5 Practice Questions
required when installing asphalt shingles
1/4
Roofing Construction & Estimating Practice Questions With 100% SURE ANSWERS
Terms in this set (42)
Typically ______ nails are required to install a 4
three tab asphalt shingle.
When installing a BUR it ypically takes ________ 3
gallons of asphalt coating to cover 100 sq. ft of
roof
Type _______ asphalt is the most commonly III
used.
_______________ is the part of the shingle not covered Exposure
by the next course of shingle
The maximum temperature you can heat a Type 475 F
III asphalt is _________ _.
The underlayment for asphalt shingles must have 4 inches
an end lap of
Roofing
_____________ pounds Construction
of nails per square are & Estimating
2.5 Practice Questions
required when installing asphalt shingles
1/4
