what is the most frequently cited OSHA violation ? ✅ Fall Protection
what are the key elements that are essential to recognizing hazards and reducing
and/or eliminating workplace hazrds ✅ 1.) management commitment and employee
involvement
2.) hazard prevention and control
3.) worksite analysis
4.) safety and health training
you are encouraged to ask your for information whenever you have a
problem or are in doubt about what to do on a job. ✅ Supervisor
it is your responsibility to follow all safety regulations, inform your employer of any
unsafe condition; report all injuries (no matter how minor they seem); and wear the
proper personal protective equipment. T/F ✅ True
what is the OSHA standard that addresses the requirements for preventing and
lessening the results of a bad release of toxic, reactive, flammable, or highly explosive
hazardous chemicals from a process ? ✅ Process Safety Management Standard
The Process Hazard Analysis (PHA) is one of the most important parts of the PSM
program. PHAs are used to identify and evaluate major processes and ensure they are:
✅ 1.) Identified
2.) Evaluated
3.) Controlled
In the PSM Standard, OSHA states employees must be trained if they work with highly
hazardous chemicals . T/F ✅ True
facilities are not permitted to control your entrance and exit in covered process areas.
T/F ✅ False
If you are replacing a piece of equipment, the new one should be the same as the one
being removed. If not, you should find out whether the change was on purpose. This is
called ? ✅ Management of Change
which of the following should be your first concern when entering the work cite ? ✅
Saftey
, Under the Stop Work Authority, you have the right and obligation to stop work activity if
you have reason to believe your own safety or a co-workers safety is in jeopardy or if
the work plan is not clearly established or understood. T/F ✅ True
To operate a plant-owned vehicle or mobile equipment while at a facility, you must be
to do so by the equipment owner. ✅ Qualified and Authorized
Work permits are usually required before the start of any job. name some of the work
permits you may encounter. ✅ 1.) Safe Work Permits
2.) Confine Space Entry Permits
3.) Hot Work Permits
4.) Line Entry / Line Breaking Permits
5.) Lockout/Tagout permits
used only where an immediate life threatening hazard exists. ✅ Danger Signs
Used where immediate non-life threatening hazards exist. ✅ Warning signs
Used to warn against potential hazards or to caution against unsafe practices. ✅
Caution Signs
Physical devices that are designed to prevent entry into an area where hazards are
present. ✅ Barriers
obstacles that discourage the passage of persons or vehicles. ✅ Barricade
when lifting or setting down a load, you bend at the ? ✅ Knees
If you experience pain or discomfort as a result of your work activities ,when should you
should report it to your supervisor ? ✅ As soon as possible
what are the most common diseases caused by bloodborne pathogens in the
workplace: ✅ Human Immunodeficiency virus (HIV)
Hepatitis B Virus (HBV)
Hepatitis C Virus (HCV)
Universal Precautions is an infection control approach where you treat all blood and
body fluids as if they are known to be infectious for the blood borne pathogens only if
the injured person is sick. T/F ✅ False
In the Globally Harmonized System (GHS) which is the LEAST severe in the hazard
ratings ? ✅ # 5
what are the key elements that are essential to recognizing hazards and reducing
and/or eliminating workplace hazrds ✅ 1.) management commitment and employee
involvement
2.) hazard prevention and control
3.) worksite analysis
4.) safety and health training
you are encouraged to ask your for information whenever you have a
problem or are in doubt about what to do on a job. ✅ Supervisor
it is your responsibility to follow all safety regulations, inform your employer of any
unsafe condition; report all injuries (no matter how minor they seem); and wear the
proper personal protective equipment. T/F ✅ True
what is the OSHA standard that addresses the requirements for preventing and
lessening the results of a bad release of toxic, reactive, flammable, or highly explosive
hazardous chemicals from a process ? ✅ Process Safety Management Standard
The Process Hazard Analysis (PHA) is one of the most important parts of the PSM
program. PHAs are used to identify and evaluate major processes and ensure they are:
✅ 1.) Identified
2.) Evaluated
3.) Controlled
In the PSM Standard, OSHA states employees must be trained if they work with highly
hazardous chemicals . T/F ✅ True
facilities are not permitted to control your entrance and exit in covered process areas.
T/F ✅ False
If you are replacing a piece of equipment, the new one should be the same as the one
being removed. If not, you should find out whether the change was on purpose. This is
called ? ✅ Management of Change
which of the following should be your first concern when entering the work cite ? ✅
Saftey
, Under the Stop Work Authority, you have the right and obligation to stop work activity if
you have reason to believe your own safety or a co-workers safety is in jeopardy or if
the work plan is not clearly established or understood. T/F ✅ True
To operate a plant-owned vehicle or mobile equipment while at a facility, you must be
to do so by the equipment owner. ✅ Qualified and Authorized
Work permits are usually required before the start of any job. name some of the work
permits you may encounter. ✅ 1.) Safe Work Permits
2.) Confine Space Entry Permits
3.) Hot Work Permits
4.) Line Entry / Line Breaking Permits
5.) Lockout/Tagout permits
used only where an immediate life threatening hazard exists. ✅ Danger Signs
Used where immediate non-life threatening hazards exist. ✅ Warning signs
Used to warn against potential hazards or to caution against unsafe practices. ✅
Caution Signs
Physical devices that are designed to prevent entry into an area where hazards are
present. ✅ Barriers
obstacles that discourage the passage of persons or vehicles. ✅ Barricade
when lifting or setting down a load, you bend at the ? ✅ Knees
If you experience pain or discomfort as a result of your work activities ,when should you
should report it to your supervisor ? ✅ As soon as possible
what are the most common diseases caused by bloodborne pathogens in the
workplace: ✅ Human Immunodeficiency virus (HIV)
Hepatitis B Virus (HBV)
Hepatitis C Virus (HCV)
Universal Precautions is an infection control approach where you treat all blood and
body fluids as if they are known to be infectious for the blood borne pathogens only if
the injured person is sick. T/F ✅ False
In the Globally Harmonized System (GHS) which is the LEAST severe in the hazard
ratings ? ✅ # 5
