The Associate CET Study Guide Exam
Question And Answers 2024
B+, or supply voltages in electronics products, is
considered to be:
A. +5 to +12 VDC
B. 0 to 30 V DC
C. +12 to 300 V DC
D. The anode or plate voltage supply - correct
answers✅D. The anode or plate voltage supply
Leakage current in an electronic product, between either
of the AC power cord conductors and the chassis or any
exposed metals should not exceed _________.
A. 5 microamps
B. 500 microamps
C. 5 milliamps
D. 50 milliamps - correct answers✅B. 500 microamps
Shaded components on the electronics schematics mean:
A. Only factory service personnel may change the part
B. Only exact replacement parts may be used
C. The shading makes for better readability
,The Associate CET Study Guide Exam
Question And Answers 2024
D. High voltage is present on these parts - correct
answers✅B. Only exact replacement parts may be used
Ingested solder fumes when particles _______.
A. I'm not harmful to the human body
B. Are toxic
C. From lead-tin solder aren't harmful
D. From tin-alloys are most harmful - correct
answers✅B. Are toxic
Second degree skin burns should ________.
A. Not be treated with ice and bandage pack
B. Be covered with thick bandages
C. Be treated with cold water or ice
D. Be treated by draining blisters - correct answers✅A.
Not be treated with ice and bandage pack
Rules describing the fire or toxicity retardant types of
cabling which may be installed in buildings is contained in
_________.
,The Associate CET Study Guide Exam
Question And Answers 2024
A. NEC Article 770
B. UL 569B
C. TIA/EIA standard 578
D. NEMA code 1316 - correct answers✅A. NEC Article
770
ESD and static discharge is most destructive to _______.
A. CMOS semiconductors
B. TTL semiconductors
C. Germanium PN junctions
D. Silicon PN junctions - correct answers✅A. CMOS
semiconductors
If you have never receive formal training and practice
CPR want a pricing or dummy, in the event of finding a
fellow worker not breathing, you _________.
A. Should use what knowledge you do half of the
procedure and attempt it
B. Should not attempt it, but call for help
C. Should attempt it after calling for help
, The Associate CET Study Guide Exam
Question And Answers 2024
D. Should, if handy, read the instructions and attempt in
order to save the life - correct answers✅B. Should not
attempt it, but call for help
When working at heights above 6 feet, a ________ is
required by OSHA rules.
A. Linesman's belt
B. Linesman's belt attached to a lanyard
C. Full body harness attached to a lanyard that prevents
more than a 6 foot drop
D. Good insurance policy - correct answers✅C. Full
body harness attached to a lanyard that prevents more
than a 6 foot drop
'Phantom' current is associated with ________.
A. Northern Lights
B. Corona arcing from electrical generators
C. Charge retained by inductors
D. Charge retained by capacitors - correct answers✅D.
Charge retained by capacitors
Question And Answers 2024
B+, or supply voltages in electronics products, is
considered to be:
A. +5 to +12 VDC
B. 0 to 30 V DC
C. +12 to 300 V DC
D. The anode or plate voltage supply - correct
answers✅D. The anode or plate voltage supply
Leakage current in an electronic product, between either
of the AC power cord conductors and the chassis or any
exposed metals should not exceed _________.
A. 5 microamps
B. 500 microamps
C. 5 milliamps
D. 50 milliamps - correct answers✅B. 500 microamps
Shaded components on the electronics schematics mean:
A. Only factory service personnel may change the part
B. Only exact replacement parts may be used
C. The shading makes for better readability
,The Associate CET Study Guide Exam
Question And Answers 2024
D. High voltage is present on these parts - correct
answers✅B. Only exact replacement parts may be used
Ingested solder fumes when particles _______.
A. I'm not harmful to the human body
B. Are toxic
C. From lead-tin solder aren't harmful
D. From tin-alloys are most harmful - correct
answers✅B. Are toxic
Second degree skin burns should ________.
A. Not be treated with ice and bandage pack
B. Be covered with thick bandages
C. Be treated with cold water or ice
D. Be treated by draining blisters - correct answers✅A.
Not be treated with ice and bandage pack
Rules describing the fire or toxicity retardant types of
cabling which may be installed in buildings is contained in
_________.
,The Associate CET Study Guide Exam
Question And Answers 2024
A. NEC Article 770
B. UL 569B
C. TIA/EIA standard 578
D. NEMA code 1316 - correct answers✅A. NEC Article
770
ESD and static discharge is most destructive to _______.
A. CMOS semiconductors
B. TTL semiconductors
C. Germanium PN junctions
D. Silicon PN junctions - correct answers✅A. CMOS
semiconductors
If you have never receive formal training and practice
CPR want a pricing or dummy, in the event of finding a
fellow worker not breathing, you _________.
A. Should use what knowledge you do half of the
procedure and attempt it
B. Should not attempt it, but call for help
C. Should attempt it after calling for help
, The Associate CET Study Guide Exam
Question And Answers 2024
D. Should, if handy, read the instructions and attempt in
order to save the life - correct answers✅B. Should not
attempt it, but call for help
When working at heights above 6 feet, a ________ is
required by OSHA rules.
A. Linesman's belt
B. Linesman's belt attached to a lanyard
C. Full body harness attached to a lanyard that prevents
more than a 6 foot drop
D. Good insurance policy - correct answers✅C. Full
body harness attached to a lanyard that prevents more
than a 6 foot drop
'Phantom' current is associated with ________.
A. Northern Lights
B. Corona arcing from electrical generators
C. Charge retained by inductors
D. Charge retained by capacitors - correct answers✅D.
Charge retained by capacitors
