CRST EXAM WITH QUESTIONS AND WELL VERIFIED
ANSWERS [ALREADY GRADED A+] REAL
EXAM!!!ACTUAL 100%
The Recommended Maximum weight for Containerized Trays is: - ANS✔✔--25
lbs
What Action Should the CS Technician Take If While Assembling An Instrument
Tray, He Finds out that some Instruments Were missing? - ANS✔✔--He should
seek clearance from the owning department to substitute the missing instrument
If a processed tray is opened and found to be missing internal chemical indicator,
what needs to happen? - ANS✔✔--The tray should not be used in surgical
procedures
Which of the following indicators is recommended for use in monitoring
Sterilization Cycles? - ANS✔✔--Type 5 or 6 Indicators
, Requirement for cleaning, disinfection, sterilization, inspection, and routine
maintenance of equipment can be obtained from? - ANS✔✔--IFU
The efficacy of sterilizers should be routinely monitored using: - ANS✔✔--BI
PCD
The Three major areas in sterility assurance related to environmental controls
are: - ANS✔✔--Temperature, humidity, Air Exchanges
When does sterile storage process begin? - ANS✔✔--When the sterilizer door
is opened at the end of the cycle
The bottom shelf of any sterile storage system should be - ANS✔✔--Solid and
8-10 inches from the floor
Trays with overhang shelving... - ANS✔✔--can be contaminated
To prevent coagulation of proteins, instruments should be pre-rinsed Using -
ANS✔✔--Cold Water
Which of the following areas should be cleaned first? - ANS✔✔--Sterile Storage
The two key factors to consider when handling sterilized items are: - ANS✔✔--
Employee safety and contamination of sterile items
ANSWERS [ALREADY GRADED A+] REAL
EXAM!!!ACTUAL 100%
The Recommended Maximum weight for Containerized Trays is: - ANS✔✔--25
lbs
What Action Should the CS Technician Take If While Assembling An Instrument
Tray, He Finds out that some Instruments Were missing? - ANS✔✔--He should
seek clearance from the owning department to substitute the missing instrument
If a processed tray is opened and found to be missing internal chemical indicator,
what needs to happen? - ANS✔✔--The tray should not be used in surgical
procedures
Which of the following indicators is recommended for use in monitoring
Sterilization Cycles? - ANS✔✔--Type 5 or 6 Indicators
, Requirement for cleaning, disinfection, sterilization, inspection, and routine
maintenance of equipment can be obtained from? - ANS✔✔--IFU
The efficacy of sterilizers should be routinely monitored using: - ANS✔✔--BI
PCD
The Three major areas in sterility assurance related to environmental controls
are: - ANS✔✔--Temperature, humidity, Air Exchanges
When does sterile storage process begin? - ANS✔✔--When the sterilizer door
is opened at the end of the cycle
The bottom shelf of any sterile storage system should be - ANS✔✔--Solid and
8-10 inches from the floor
Trays with overhang shelving... - ANS✔✔--can be contaminated
To prevent coagulation of proteins, instruments should be pre-rinsed Using -
ANS✔✔--Cold Water
Which of the following areas should be cleaned first? - ANS✔✔--Sterile Storage
The two key factors to consider when handling sterilized items are: - ANS✔✔--
Employee safety and contamination of sterile items
