FDOT Earthwork 2 quick Questions And Solutions

FDOT Earthwork 2 quick Questions And Solutions muck - answers A-8 Material LBR - answers Strength test of material based on standardized 800 psi Select - answers Material that can be used anywhere in the the embankment one - answers number of density log books per contact verification - answers testing done by department dry - answers blank density is the weight of solid should lot - answers a single lift of finished material cover zone - answers area from the bottom of the pipe to 12 inches above resolution - answers testing to resolve QC & VT differences High Plastic - answers Material with LL greater than 50 Wet Density - answers weight of soil and water Modified Proctor - answers Proctor usually used for subgrade and base. FM1-T180 control line - answers set by normal shoulder points Quality Control - answers Plan prepared by contractor Bedding Zone - answers Zone directly beneath the pipe. Standard Proctor - answers protor typically used for embankment material. AASHTO T-99 Lift - answers 6inches of compacted material cor full width. 2 pounds per cubic feet - answers comparison difference for gages of same manufacturers 3 pounds per cubic feet - answers comparison difference for gages of different manufacturers. bleeding - answers when moisture is drawn up by capillary action to the surface of material being compacted bridging - answers when the compactive effort does not penetrate the full thickness of the lift being compacted plastic - answers Material with LL less than 50 acceptance - answers testing done by contractor once - answers How many initial equipment comparison typically done per project six - answers depth in inches for plowing after root removal