ASE Practice Test 1 QUESTIONS &
ANSWERS(RATED A)
A client reports hearing rattling originating from the engine. The drive belt/serpentine belt system is
where it is coming from, according to technician A. The following step is to - ANSWER Inspect the pulleys
for signs of excess play or bearing noise
As it travels, an automobile leans to one side. The following is a list of the root causes of this issue.
Which one ought to you examine first? - ANSWER Low or uneven tire pressure
A car with a transmission issue arrives into your shop. What should you do first? - ANSWER Check the
fluid level
What sequence should spark plugs be changed in? - ANSWER One at a time, starting at the bottom of
the row
A radiator flush is being finished by you. The old coolant has been drained, and the flush solution has
been applied. What comes after that? - ANSWER Turn the vehicle on and let it run until it reaches its
normal operating temperature.
A fuel tank needs to be changed. All of the gas in the car has been removed and stored. What comes
after that? - ANSWER Disconnect the fuel lines.
Brake pads are being changed. The wheels have already been taken off. What should most cars do as
their next course of action? - ANSWER Unbolt the caliper
insulation cracks are almost always the root of spark plug wiring issues. - ANSWER True
The adage "snug, but not too hard" should be followed when tightening an oil drain stopper after
replacement. - ANSWER False
ANSWERS(RATED A)
A client reports hearing rattling originating from the engine. The drive belt/serpentine belt system is
where it is coming from, according to technician A. The following step is to - ANSWER Inspect the pulleys
for signs of excess play or bearing noise
As it travels, an automobile leans to one side. The following is a list of the root causes of this issue.
Which one ought to you examine first? - ANSWER Low or uneven tire pressure
A car with a transmission issue arrives into your shop. What should you do first? - ANSWER Check the
fluid level
What sequence should spark plugs be changed in? - ANSWER One at a time, starting at the bottom of
the row
A radiator flush is being finished by you. The old coolant has been drained, and the flush solution has
been applied. What comes after that? - ANSWER Turn the vehicle on and let it run until it reaches its
normal operating temperature.
A fuel tank needs to be changed. All of the gas in the car has been removed and stored. What comes
after that? - ANSWER Disconnect the fuel lines.
Brake pads are being changed. The wheels have already been taken off. What should most cars do as
their next course of action? - ANSWER Unbolt the caliper
insulation cracks are almost always the root of spark plug wiring issues. - ANSWER True
The adage "snug, but not too hard" should be followed when tightening an oil drain stopper after
replacement. - ANSWER False
