QUESTIONS AND CORRECT VERIFIED ANSWERS/ALREADY
GRADED A+ 100% GUARANTEED TO PASS CONCEPTS(ALL
WHAT YOU NEED) LATEST EDITION 2024
If the resolution test results compare favorably with the Contractor's QC test
results:
A. The Lot is accepted at full pay
B. The Contractor is required to remove and replace the Lot in question
C. The Resolution tests are used for pay for that Lot and the Contractor pays for
the testing
D. The Contractor's QC results are used for pay for that Lot and the Department
pays for the testing
E. The Contractor pays for the Resolution testing - ANSWER-(D.) The
Contractor's QC results are used for pay for that Lot and the Department pays
for testing
What materials are approved for use for tack application?
A. SS-1 or CSS-1, SS-1H or CSS-1H
B. RS-1, RS-2, MC-250, SS-4
C. RS-1h, RS-2, CRS-1h, NTSS-1hm, RA-500
D. All the Above
E. None of the Above - ANSWER-(C.) RS-1h, RS-2, CRS-1h, NTSS-1hm, RA-500
, The minimum air temperature (in the shade away from artificial heat) for a 1.5
inch layer of asphalt is:
A. 40°F
B. 45°F
C. 50°F
D. 65°F and rising - ANSWER-(A.) 40°F
A quality of Asphalt Mix will be:
A. Constructable
B. Conform to specifications
C. Satisfy the functional requirements
D. All the above - ANSWER-(D. All the above) - Constructable, conform to
specifications, and satisfy the functional requirements
Which condition will result in more time available for compaction?
A. SP-19 coarse mix during the day
B. FC-9.5 fine mix at night
C. FC-9.5 coarse mix during the day
D. SP-12.5 fine mix with PG76-22 - ANSWER-(A.) SP-19 coarse mix during the
day
The fallowing statement is true about trucks used to haul asphalt mix:
A. Truck drivers must be certified to haul asphalt mix
B. Truck beds need to be clean and smooth
C. Hole must be present in both sides of truck bed
D. All the above