ASPHALT PAVING LEVEL 2 QUESTIONS AND COMPLETE 100% CORRECT ANSWERS WITH RATIONALES WELL EXPLAINED BY EXPERTS ALREADY PASSED!!! LATEST UPDATE 2024 GRADED A+ WITH 100% GUARANTEED SUCCESS AFTER DOWNLOAD (ALL YOU NEED TO PASS YOUR EXAMS)

ASPHALT PAVING LEVEL 2 QUESTIONS AND COMPLETE 100% CORRECT ANSWERS WITH RATIONALES WELL EXPLAINED BY EXPERTS ALREADY PASSED!!! LATEST UPDATE 2024 GRADED A+ WITH 100% GUARANTEED SUCCESS AFTER DOWNLOAD (ALL YOU NEED TO PASS YOUR EXAMS) (T/F:) When the total quantity of hot mix asphalt for the project, as indicated on the plans for Type SP and Type FC mixtures only, is less than 2000 tons, the Engineer will accept the mix on the basis of visual inspection, the Engineer may run acceptance tests to determine the acceptability of the material. True If the resolution test results compare favorably with the Contractor's QC test results: A. The Lot is accepted at full pay B. The Contractor is required to remove and replace the Lot in question C. The Resolution tests are used for pay for that Lot and the Contractor pays for the testing D. The Contractor's QC results are used for pay for that Lot and the Department pays for the testing E. The Contractor pays for the Resolution testing (D.) The Contractor's QC results are used for pay for that Lot and the Department pays for testing What materials are approved for use for tack application? A. SS-1 or CSS-1, SS-1H or CSS-1H B. RS-1, RS-2, MC-250, SS-4 C. RS-1h, RS-2, CRS-1h, NTSS-1hm, RA-500 D. All the Above E. None of the Above (C.) RS-1h, RS-2, CRS-1h, NTSS-1hm, RA-500 The minimum air temperature (in the shade away from artificial heat) for a 1.5 inch layer of asphalt is: A. 40°F B. 45°F C. 50°F