©SOPHIABENNETT@2024-2025 Monday, August 26, 2024 6:09 AM
SACA Certification C-101 Practice
Questions and Answers
The three Fs of product design are form, fit and __________. - Answer✔️✔️-
Function
High product quality, quick delivery, low costs are the primary goals of
what system? - Answer✔️✔️-Lean Manufacturing
Which 5S step involves formatting 5S work instructions so that they look
and read alike? - Answer✔️✔️-Standardize
How does the 5S method aid in the goal of lean manufacturing? -
Answer✔️✔️-Reduces the waste of excess motion, helps improve morale,
and enables other lean methods to be more successful
What is the interface used with CNC machines to load and monitor
programs? - Answer✔️✔️-HMI
The automation of many different manufacturing processes is done
through the use of a small computer called a __________. - Answer✔️✔️-PLC
When a machine stops due to an problem, what would the machine's HMI
typically display? - Answer✔️✔️-An error message.
Smart sensors connected to manufacturing networks creates what level of
Industry? - Answer✔️✔️-Industry 4.0
1
, ©SOPHIABENNETT@2024-2025 Monday, August 26, 2024 6:09 AM
What standard introduced in the early 1980s established a method to
physically connect machines from different manufacturers enabling them
to communicate to one another? - Answer✔️✔️-Ethernet
Which IIoT application monitors equipment during normal operation to
prevent failures to the equipment? - Answer✔️✔️-Predictive maintenance
Occupational Safety and Health Administration(OSHA) develops
__________ for safety retail and service industries to construction and
manufacturing. - Answer✔️✔️-Standards
The regulation that requires manufacturers to document and report
information on the types of chemicals they use, store, release into the
environment, or dispose of is known as EPCRA. Is this statement TRUE or
FALSE? - Answer✔️✔️-True
The use of ___________________marked the advent of the third industrial
revolution? - Answer✔️✔️-Computers
If an operator knows a safety problem exists with a machine, the operator
should __________. - Answer✔️✔️-Notify a supervisor immediately
A(n) __________ is a device or system that shuts down a machine
immediately if the operator is in danger. - Answer✔️✔️-Emergency stop
If the energy sources are shut down, what would this mean for a
pneumatic valve? - Answer✔️✔️-It is closed
2
, ©SOPHIABENNETT@2024-2025 Monday, August 26, 2024 6:09 AM
What are the 5 steps of electrical Lockout/tagout - Answer✔️✔️-1. Shut
down the equipment
2.Connect Hasp
3. Attach Lock
4. Add Tag
5. Test Start Equipment
Which of the following is a common cause of workplace death? -
Answer✔️✔️-Falls
The process of identifying potential hazards in the workplace is known as a
__________. - Answer✔️✔️-Hazard assessment
An injury is defined as physical harm to the body that happens as a result
of exposure to some form of energy that exceeds the body's tolerance. Is
this statement TRUE or FALSE? - Answer✔️✔️-TRUE
In the event of an evacuation alarm, employees should __________. -
Answer✔️✔️-Shut down their machines and leave the building
After exposure to most chemicals the eyes should be flushed continuously
for __________ minutes. - Answer✔️✔️-15
Grease is made from a liquid lubricant with what added to it to make it
semi-solid? - Answer✔️✔️-Thickeners
3
SACA Certification C-101 Practice
Questions and Answers
The three Fs of product design are form, fit and __________. - Answer✔️✔️-
Function
High product quality, quick delivery, low costs are the primary goals of
what system? - Answer✔️✔️-Lean Manufacturing
Which 5S step involves formatting 5S work instructions so that they look
and read alike? - Answer✔️✔️-Standardize
How does the 5S method aid in the goal of lean manufacturing? -
Answer✔️✔️-Reduces the waste of excess motion, helps improve morale,
and enables other lean methods to be more successful
What is the interface used with CNC machines to load and monitor
programs? - Answer✔️✔️-HMI
The automation of many different manufacturing processes is done
through the use of a small computer called a __________. - Answer✔️✔️-PLC
When a machine stops due to an problem, what would the machine's HMI
typically display? - Answer✔️✔️-An error message.
Smart sensors connected to manufacturing networks creates what level of
Industry? - Answer✔️✔️-Industry 4.0
1
, ©SOPHIABENNETT@2024-2025 Monday, August 26, 2024 6:09 AM
What standard introduced in the early 1980s established a method to
physically connect machines from different manufacturers enabling them
to communicate to one another? - Answer✔️✔️-Ethernet
Which IIoT application monitors equipment during normal operation to
prevent failures to the equipment? - Answer✔️✔️-Predictive maintenance
Occupational Safety and Health Administration(OSHA) develops
__________ for safety retail and service industries to construction and
manufacturing. - Answer✔️✔️-Standards
The regulation that requires manufacturers to document and report
information on the types of chemicals they use, store, release into the
environment, or dispose of is known as EPCRA. Is this statement TRUE or
FALSE? - Answer✔️✔️-True
The use of ___________________marked the advent of the third industrial
revolution? - Answer✔️✔️-Computers
If an operator knows a safety problem exists with a machine, the operator
should __________. - Answer✔️✔️-Notify a supervisor immediately
A(n) __________ is a device or system that shuts down a machine
immediately if the operator is in danger. - Answer✔️✔️-Emergency stop
If the energy sources are shut down, what would this mean for a
pneumatic valve? - Answer✔️✔️-It is closed
2
, ©SOPHIABENNETT@2024-2025 Monday, August 26, 2024 6:09 AM
What are the 5 steps of electrical Lockout/tagout - Answer✔️✔️-1. Shut
down the equipment
2.Connect Hasp
3. Attach Lock
4. Add Tag
5. Test Start Equipment
Which of the following is a common cause of workplace death? -
Answer✔️✔️-Falls
The process of identifying potential hazards in the workplace is known as a
__________. - Answer✔️✔️-Hazard assessment
An injury is defined as physical harm to the body that happens as a result
of exposure to some form of energy that exceeds the body's tolerance. Is
this statement TRUE or FALSE? - Answer✔️✔️-TRUE
In the event of an evacuation alarm, employees should __________. -
Answer✔️✔️-Shut down their machines and leave the building
After exposure to most chemicals the eyes should be flushed continuously
for __________ minutes. - Answer✔️✔️-15
Grease is made from a liquid lubricant with what added to it to make it
semi-solid? - Answer✔️✔️-Thickeners
3
