ROPD 4a mod 2 Exam/20 Questions &
Answers
What are the unique qualities of AR 385-63/MCO 3570.1 C - -The document
is an interservice document consisting of an army regulation an Marine Corp
Order
-What are the minimum distances targets can be engaged when firing the
MK-19 - -Only at ranges greater than 310 meters
-In the context of RM and range safety, mitigation of risk is the ability to - -
Minimize or eliminate the threat a risk presents by implementing controls
-Five steps of the RM process include identify hazards, assess hazards,
___________, implement controls, and supervise and evaluate - -Develop
controls and make risk decisions
-Who controls and coordinates all ranges and publishes safe range use
requirements for ranges - -Senior commander is wrong
-Five steps of the RM process include identify hazards, assess hazards, make
risk decisions, implement controls, and ____________ and ________ - -
Supervise and evaluate
-What impact areas are extremely dangerous due to the sensitivity of the
duds contained within the boundaries - -High hazard
-The three types of impact areas in accordance with DA PAM 385-63 would
include temporary, dedicated and __________ - -High hazard
-A DoD range is defined as - -A designated land or water area that includes
firing lanes (The longest answer)
-Which statement represents the importance of airspace as it relates to
training on ground ranges - -Airspace must be accounted for in planning and
conduct (the longest one
-SDZ graphic question, Distance X - -6500m
-Four types of impact media; earth, water, steel, __________ - -Concrete
-Batwing SDZ; color purple is________ - -Ricochet Area
-Mortar live fire Risk assessment - -Not Low, most likely moderate?
Answers
What are the unique qualities of AR 385-63/MCO 3570.1 C - -The document
is an interservice document consisting of an army regulation an Marine Corp
Order
-What are the minimum distances targets can be engaged when firing the
MK-19 - -Only at ranges greater than 310 meters
-In the context of RM and range safety, mitigation of risk is the ability to - -
Minimize or eliminate the threat a risk presents by implementing controls
-Five steps of the RM process include identify hazards, assess hazards,
___________, implement controls, and supervise and evaluate - -Develop
controls and make risk decisions
-Who controls and coordinates all ranges and publishes safe range use
requirements for ranges - -Senior commander is wrong
-Five steps of the RM process include identify hazards, assess hazards, make
risk decisions, implement controls, and ____________ and ________ - -
Supervise and evaluate
-What impact areas are extremely dangerous due to the sensitivity of the
duds contained within the boundaries - -High hazard
-The three types of impact areas in accordance with DA PAM 385-63 would
include temporary, dedicated and __________ - -High hazard
-A DoD range is defined as - -A designated land or water area that includes
firing lanes (The longest answer)
-Which statement represents the importance of airspace as it relates to
training on ground ranges - -Airspace must be accounted for in planning and
conduct (the longest one
-SDZ graphic question, Distance X - -6500m
-Four types of impact media; earth, water, steel, __________ - -Concrete
-Batwing SDZ; color purple is________ - -Ricochet Area
-Mortar live fire Risk assessment - -Not Low, most likely moderate?
