AutoCAD Certification
By default, AutoCAD has the following workspaces. - Answer- - 2D Drafting &
Annotation
- 3D Modeling
- AutoCAD Classic
Object snap tracking works in combination with object snaps to enable you to
temporarily acquire & track up to how many points? - Answer- Seven
Which of the following settings can be made for polar tracking? - Answer- -
Increment Angle
- Additional Angles
If you need the text to be reversed, when you mirror the text, then you need to set: -
Answer- MIRRTEXT TO 1
By selecting which one of the following, the objects on the layer are not visible and
are not considered when the drawing is regenerated? - Answer- When you froze the
layer
When you use the match properties command, you can select multiple source
objects. True/FALSE - Answer- False
You can set the viewport scale factor by _____________________. - Answer- -
Typing VSCALE
- TYPING VPSCALE
- TYPING viewportscale.
***NONE***
What happens when you set VPROTATEASSOC system variable to 0? - Answer-
When a viewport is rotated, the view inside is not rotated.
If you modify a dimension style, all dimensions using that style in the drawing update
automatically. - Answer- True
If you cannot fillet or chamfer the first segment of a polyline with the last segment of
the same polyline. true/false - Answer- True
Which key do you press to cycle through the available snap points? - Answer- Tab
One of the below options is wrong about type of Autocad drawing units. Which one is
it? - Answer- Millimeter
With a hot grip, which of these editing tasks can you perform? - Answer- - Move
- Rotate
- Scale
, In order to move an object, __________________________. - Answer- - Select a
base point followed by a point to define where the object is moving to.
- Use the displacement option.
- Select an object for grips, the move.
- ALL OF THE ABOVE.
When using copy with grips, select copy after you have selected an option, such as
move, mirror, rotate, scale, or stretch. True/False? - Answer- True
Using object snaps to select points for inquiry commands is critical. - Answer- True
What happens if you fillet these two lines with the radius of 0? - Answer- Sharp
Corner
The following are some of the properties & settings that you can save in a layout,
except __________________. - Answer- Line weight
With the multiline text editor, you can do all of the following, except: - Answer- Insert
pictures
If you copy and paste text from another drawing or insert a block into a drawing that
has the same text style name with different properties, the text properties of the host
drawing will take precedence. True/False? - Answer- True
What is the command used to draw the above dimension line? - Answer-
DIMJOGLINE
The multileader's 4,8,9 represent. - Answer- collected multileaders
What type of island detection type is this? - Answer- Normal
Using the purge command, we can purge referenced blocks. - Answer- False
When you explode a block, the geometry returns to its original properties. True/
False - Answer- True
Which options are used to draw this polyline? - Answer- - Line
- Arc
- Width
A well constructed drawing should be ________________. - Answer- Boringly
Consitent
Which of the following file extensions are used for AutoCAD standards files? -
Answer- .dws
CAD standards are configured from the _______________ tab on the ribbon. -
Answer- Manage
By default, AutoCAD has the following workspaces. - Answer- - 2D Drafting &
Annotation
- 3D Modeling
- AutoCAD Classic
Object snap tracking works in combination with object snaps to enable you to
temporarily acquire & track up to how many points? - Answer- Seven
Which of the following settings can be made for polar tracking? - Answer- -
Increment Angle
- Additional Angles
If you need the text to be reversed, when you mirror the text, then you need to set: -
Answer- MIRRTEXT TO 1
By selecting which one of the following, the objects on the layer are not visible and
are not considered when the drawing is regenerated? - Answer- When you froze the
layer
When you use the match properties command, you can select multiple source
objects. True/FALSE - Answer- False
You can set the viewport scale factor by _____________________. - Answer- -
Typing VSCALE
- TYPING VPSCALE
- TYPING viewportscale.
***NONE***
What happens when you set VPROTATEASSOC system variable to 0? - Answer-
When a viewport is rotated, the view inside is not rotated.
If you modify a dimension style, all dimensions using that style in the drawing update
automatically. - Answer- True
If you cannot fillet or chamfer the first segment of a polyline with the last segment of
the same polyline. true/false - Answer- True
Which key do you press to cycle through the available snap points? - Answer- Tab
One of the below options is wrong about type of Autocad drawing units. Which one is
it? - Answer- Millimeter
With a hot grip, which of these editing tasks can you perform? - Answer- - Move
- Rotate
- Scale
, In order to move an object, __________________________. - Answer- - Select a
base point followed by a point to define where the object is moving to.
- Use the displacement option.
- Select an object for grips, the move.
- ALL OF THE ABOVE.
When using copy with grips, select copy after you have selected an option, such as
move, mirror, rotate, scale, or stretch. True/False? - Answer- True
Using object snaps to select points for inquiry commands is critical. - Answer- True
What happens if you fillet these two lines with the radius of 0? - Answer- Sharp
Corner
The following are some of the properties & settings that you can save in a layout,
except __________________. - Answer- Line weight
With the multiline text editor, you can do all of the following, except: - Answer- Insert
pictures
If you copy and paste text from another drawing or insert a block into a drawing that
has the same text style name with different properties, the text properties of the host
drawing will take precedence. True/False? - Answer- True
What is the command used to draw the above dimension line? - Answer-
DIMJOGLINE
The multileader's 4,8,9 represent. - Answer- collected multileaders
What type of island detection type is this? - Answer- Normal
Using the purge command, we can purge referenced blocks. - Answer- False
When you explode a block, the geometry returns to its original properties. True/
False - Answer- True
Which options are used to draw this polyline? - Answer- - Line
- Arc
- Width
A well constructed drawing should be ________________. - Answer- Boringly
Consitent
Which of the following file extensions are used for AutoCAD standards files? -
Answer- .dws
CAD standards are configured from the _______________ tab on the ribbon. -
Answer- Manage
