ISCET CERTIFICATION
EXAM (2024)
QUESTIONS WITH
COMPLETE SOLUTIONS
GRADED A+
ISCET
Evatee 8/8/24 ISCET
, ISCET CERTIFICATION EXAM (2024)
QUESTIONS WITH COMPLETE SOLUTIONS
GRADED A+
the purpose of an in-line fuse on the positive lead of a DC circuit is: Answer -
protect the circuit from a direct short or overload
what is the safest method of removing solder from a printed circuit board?
Answer - use a solder wick
if batteries in a DC circuit are installed in a series aiding configuration, the
resulting values will be: Answer - higher voltage and no charge in current
a DC power source rater 150W @ 5V will handle a current demand of: Answer
- 30 A
red, orange, red, silver Answer - 2,300 (2.3k) +/- 10%
what happens when one resistor in a series string of resistors becomes open?
Answer - the current is zero through all resistors
ground is defined as: Answer - a reference point for measurement
an anti-static wrist strap should be used in the handling of: Answer -
integrated circuits
EXAM (2024)
QUESTIONS WITH
COMPLETE SOLUTIONS
GRADED A+
ISCET
Evatee 8/8/24 ISCET
, ISCET CERTIFICATION EXAM (2024)
QUESTIONS WITH COMPLETE SOLUTIONS
GRADED A+
the purpose of an in-line fuse on the positive lead of a DC circuit is: Answer -
protect the circuit from a direct short or overload
what is the safest method of removing solder from a printed circuit board?
Answer - use a solder wick
if batteries in a DC circuit are installed in a series aiding configuration, the
resulting values will be: Answer - higher voltage and no charge in current
a DC power source rater 150W @ 5V will handle a current demand of: Answer
- 30 A
red, orange, red, silver Answer - 2,300 (2.3k) +/- 10%
what happens when one resistor in a series string of resistors becomes open?
Answer - the current is zero through all resistors
ground is defined as: Answer - a reference point for measurement
an anti-static wrist strap should be used in the handling of: Answer -
integrated circuits
