15.13 ENG
How are the 2 ignition systems supplied? - correct answer-Emergency power
Normal power
How does the starter motor operate the engine compressor? - correct answer-Through the
accessory gearbox
How is the ignition and the fuel supply to the combustion chamber turned on? - correct
answer-Engine start lever
How is the throttle kept in a selected position? - correct answer-friction brake
How many ignititon systems are there per engine? - correct answer-2
How many resolvers are there? - correct answer-2 for each thrust control lever
On an ignition lead what holds the contact centered? - correct answer-Cermaic insulator
What are idle spped and the starter cut out always higher than? - correct
answer-Self-sustaining speed
What are resolvers? - correct answer-Electrical components which convert the angular
deflection of the input lever to an electrical signal
What ensures that the auto-throttle servo motor can be disconnected fro mechanical control
system? - correct answer-Coupling unit or integral friction brake
What is necessary to have for the lead? - correct answer-Cooling air
What is the disadvantage of blue ring igniter? - correct answer-toxic
What is the ignition lead? - correct answer-Internal copper wire that is connected to the
centre contact in both connectors at the end
What position will the power lever be in at idle? - correct answer-mid position
What safety measures are used on forward thrust controls? - correct answer-2 separate
signals sent from each control lever
What works as an electrical ground on the igniton lead? - correct answer-Flexible conduit
When can you adjust the immersion depth of a igniter plug? - correct answer-When the
bushing is changed
How are the 2 ignition systems supplied? - correct answer-Emergency power
Normal power
How does the starter motor operate the engine compressor? - correct answer-Through the
accessory gearbox
How is the ignition and the fuel supply to the combustion chamber turned on? - correct
answer-Engine start lever
How is the throttle kept in a selected position? - correct answer-friction brake
How many ignititon systems are there per engine? - correct answer-2
How many resolvers are there? - correct answer-2 for each thrust control lever
On an ignition lead what holds the contact centered? - correct answer-Cermaic insulator
What are idle spped and the starter cut out always higher than? - correct
answer-Self-sustaining speed
What are resolvers? - correct answer-Electrical components which convert the angular
deflection of the input lever to an electrical signal
What ensures that the auto-throttle servo motor can be disconnected fro mechanical control
system? - correct answer-Coupling unit or integral friction brake
What is necessary to have for the lead? - correct answer-Cooling air
What is the disadvantage of blue ring igniter? - correct answer-toxic
What is the ignition lead? - correct answer-Internal copper wire that is connected to the
centre contact in both connectors at the end
What position will the power lever be in at idle? - correct answer-mid position
What safety measures are used on forward thrust controls? - correct answer-2 separate
signals sent from each control lever
What works as an electrical ground on the igniton lead? - correct answer-Flexible conduit
When can you adjust the immersion depth of a igniter plug? - correct answer-When the
bushing is changed
