Network + N10-008 Practice Exam Questions with 100% Correct Answers

Which of the following tools would generate this output? Protocol. Local address. Foreign address. State TCP 127.0.0.1:48512 Desktop-Open:64251. Established TCP 127.0.0.1:64251. Desktop-Open:48512. Established Correct Answer Netstat - displays active/ listening connections People living near your business are using your guest Wi-Fi in order to gain free Internet access and to download questionable files. Which of the following can be done to most easily address this issue? Correct Answer Reduce the wireless power levels - adjusting the power level of anAP can be an easy way to decrease the radius in which people can connect to your Wi-Fi. Leaving your power levels at their default can lead to many unintended individuals seeing your network Which protocol would be used to exchange information between different Autonomous systems? Correct Answer BSP - is an EGP (external gateway protocol) and is used to exchange information between autonomous systems. autonomous systems. - A network or a group of networks owned/controlled by a single entity Which of the following controls could be used to allow employees entry into building to be recorded by a card reader? Correct Answer Access control vestibules - physical or logical list of who entered a room/building. This could be a sign in sheet or even a complex system that reads RFID cards and records who enters/leaves in area electronically Which of the following can be used to centrally manage credentials for various accounts or privilege levels on network devices? Correct Answer TACACS+ While troubleshooting a network you notice a connection reporting Late collisions over a half duplex link. You verify that both ends of the device are indeed running half duplex interfaces. Given that information which of the following answers is the most likely cause of this scenario? Correct Answer The cable length is excessive - whenever you see lake collisions that is a telltale sign that your cable is running past its maximum recommended length for example twisted-pair cables shouldn't be run further than 100 m ( 328ft) While configuring a load balancer between multiple systems which of the following must be configured in order to ensure proper connectivity during a fail over? Correct Answer VIP - virtual IP an essential part of configuring load balance systems as a single system