Motorcycle Safety Course (MSF) Final Study Guide Exam 2024 Q&A

Motorcycle Safety Course (MSF) Final Study Guide Exam 2024 Q&A What are street motorcycles designed for us on? - CORRECT ANSWER-Public Streets What indicates engine speed in revolutions per minute (RPM)? - CORRECT ANSWERTachometer What kind of mirrors may reduce the size of blind spots, but not eliminate them? - CORRECT ANSWER-Convex Mirrors A good overall cornering strategy to use is (Search-Setup-Smooth), What is Setup? - CORRECT ANSWER-Adjusting speed and lane position as necessary before entering a corner. Which brake(s) are applied when stopping, usually? - CORRECT ANSWER-Both brakes are applied at the same time but either brake control may be used separately. What three step process is used to shift into a higher gear? - CORRECT ANSWER-1. Roll off the throttle as you squeeze the clutch. 2. Lift the shift lever firmly as far as it will go, then release it to allow it to reset. 3. Ease out the clutch lever and roll on the throttle smoothly to match engine and road speed. What three step process is used to shift into a lower gear? - CORRECT ANSWER-1. Roll off the throttle as you squeeze the clutch lever. 2. Press down the shift lever firmly, then release it to allow it to reset. 3. Ease out the clutch lever as you roll on the throttle. What should you keep in mind when selecting a motorcycle to ride? - CORRECT ANSWER-Pick a size that is right for your strength and skill level, so you can handle it well. If your helmet has an impact while you are wearing it, what should you probably do? - CORRECT ANSWER-Replace the helmet. What do flaps and fasteners on your riding clothing help do? - CORRECT ANSWERSeal out the wind Where do crashes most often happen on the road