Class 200 Final | 100% Correct | Verified | 2024 Version

____________ ____________ should not be disassembled in the field - Oil buffers Two safety precautions to be followed when first entering the elevator pit are to have the ___________ ___________ ___________open and the pit light on. - Pit stop switch Tension on the governor rope is maintained by using a - Tension sheave The ASME Safety Code requires oil buffers for elevators when traveling at a car speed of - Over 200 FPM If the pit extends more than ______ feet below the sill of the access door, a fixed vertical ladder shall be located within reach of the access door. - 3 If using a rope fall with 4 sheaves to lift 500 lbs. how much pulling force will be required? Add 10% to the weight of the load for each sheave. - 175 lbs. OSHA requires that slings used for hoisting be inspected at what intervals? - Each day before using Spring buffers are used only when the elevator travels at ___________ FPM or less. - 200 All measurements necessary for the installation of various components in the pit are measured with reference to the - guide rails ASME Safety Code requires that a fully compressed oil buffer should return to its normal position within _________ seconds after the elevator car or counterweight has been removed. - 90 Wood used to construct a hoisting support must be - scaffold gradeWhat is a sign of poor quality manila rope? - Dark colored fibers (True/False) All synthetics are impervious to sunlight. - False (True/False) Good quality manila rope has a light yellow co