Med gas Refresher Exam Questions and Answers
For positive pressure supply systems, control mechanisms peak calculated demand
A) 50%
B) 100%
C) 150%
D) 250%C) 150%
D) 250% - Answer- B) 100% 5.1.3.5.5.1(2)
The minimum number of exits for outdoor enclosures on bulk cryogenic liquid systems
A) 1
B) 2
C) 3
D) 4 - Answer- B) 2 5.1.3.3.2(5)
When system gas is used for testing, it shall be tested at ?
A) Most remote outlet
B) Closest Outlet
C) Equipment
D) Before Tie in - Answer- C) Equipment 5.1.12.4.8.3
When is the initial pressure test conducted
A) After blowdown of distribution piping
B) After installation of outlet/inlet rough-in assemblies
C) Prior to installation of components that would be damaged by test pressure
D) All of the above - Answer- D) All of the above 5.1.12.2.3.2
Inlets/Outlets shall be identified with name of gas or vacuum
A) TRUE
B) FALSE - Answer- A) TRUE 5.1.5.5 5.1.11.3
ASSE CERTIFICATION FOR INSTALLERS
A) 6030
B) 6020
C) 6010
D) 6040 - Answer- C) 6010 2.3.4
For positive pressure supply systems, control mechanisms peak calculated demand
A) 50%
B) 100%
C) 150%
D) 250%C) 150%
D) 250% - Answer- B) 100% 5.1.3.5.5.1(2)
The minimum number of exits for outdoor enclosures on bulk cryogenic liquid systems
A) 1
B) 2
C) 3
D) 4 - Answer- B) 2 5.1.3.3.2(5)
When system gas is used for testing, it shall be tested at ?
A) Most remote outlet
B) Closest Outlet
C) Equipment
D) Before Tie in - Answer- C) Equipment 5.1.12.4.8.3
When is the initial pressure test conducted
A) After blowdown of distribution piping
B) After installation of outlet/inlet rough-in assemblies
C) Prior to installation of components that would be damaged by test pressure
D) All of the above - Answer- D) All of the above 5.1.12.2.3.2
Inlets/Outlets shall be identified with name of gas or vacuum
A) TRUE
B) FALSE - Answer- A) TRUE 5.1.5.5 5.1.11.3
ASSE CERTIFICATION FOR INSTALLERS
A) 6030
B) 6020
C) 6010
D) 6040 - Answer- C) 6010 2.3.4
